Dreambox Resetting To Factory Defaults (Flash Erase); Dreambox Hardware Reset - DREAM MULTIMEDIA Dreambox DM7000S User Manual

Digital satellite receiver for free and encrypted dvb-tv programs with optional digital hard disk recording

Hide thumbs Also See for Dreambox DM7000S:

Table of Contents

43.6. Dreambox resetting to factory defaults (flash erase)

Your Dreambox is now flashed with a new image (Software).

Click on the Exit-Button to close Dreamup.

Disconnect the Mainspowercord from the Dreambox.

Wait at least 30 seconds.

Plug in the Coaxcable first, then the Scartcable and all other cables.

Turn on the TV and set it to AV

Plug in NOW the Mainspowercord.

As soon as you see the Dream-Logo on the TV-Screen, press the Channel-Up-Button at the Front of

the Dreambox. Hold it down until you see "flash erase" inside the LCD and then release it.

Your Dreambox will be set to factory defaults.

Note:

There is no need for a flash erase after flashing the official Software since Release 1.06.

44.

To make a hardware reset, press all three Buttons at the same Time.

- 63 -

Table of Contents