Bios Utility; Boot Sequence; Setting Passwords - Acer ICONIA W510 User Manual

BIOS
UTILITY
The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you do
not need to run this utility. However, if you encounter configuration
problems, you may need to run it.
To activate the BIOS utility, turn your computer off, then press and hold the
volume down key before pressing the power button.

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then
select Boot from the categories listed at the top of the screen.

Setting passwords

To set a password on boot, activate the BIOS utility, then select Security.
Set a supervisor password, then enable Password on boot.

BIOS utility - 83