Connecting The Product 0 - IRiver Story HD User Manual

Connecting the Product
Connecting to Your Computer
1. Turn on the device and computer.
2. If you connect the device to your computer, you will see the screen
where you can select connection mode.
- Charge Battery: The product is currently being charged.
- Connect Removable Disk: The connection between the product
and the computer is established and you can start transferring data.
Do not use cables other than the USB cable provided. It may cause malfunction.
For successful computer/USB connection, disable all functions.
Check that the product is connected to a high-power USB 2.0 port. Some low-power
USB ports built into certain peripheral devices, such as some types of keyboards
and USB hubs without internal power may not provide enough power to charge.
Disconnecting the Product
1. Safely disconnect the product from your computer by clicking the
icon on the taskbar of the computer screen.
2. Confirm the device disconnection by clicking [Confirm].
0 8 G e t t i n g S t a r t e d