Creative Nomad Jukebox User Manual page 20

To check that the NOMAD Jukebox driver was successfully installed:
1. Click the Start button on the Windows Taskbar and select
Settings, and click on Control Panel.
2. On the Control Panel window, double-click the System icon.
3. In the System Properties dialog, click the Device Manager
tab.
4. On the Device Manager tab page, double-click "Universal
Serial Bus controllers," and then check that Creative
NOMAD Jukebox is listed.
To connect the headphones to the NOMAD Jukebox:
1. Insert the headphones jack into the connector on the right side of the
NOMAD Jukebox.
2. Ensure that the lock switch on NOMAD Jukebox is in the OFF position.
3. Press and hold the Play button for two seconds.
4. Put on your headphones as shown.
Setting Up NOMAD Jukebox 8