Loading And Saving - E-Mu Xboard 25 Owner's Manual

E-MU Xboard Control

Loading and Saving

Loading and Saving operations are located in the File menu.
Load From File
This option allows you to Load saved Bank Files, Patch Files or Both into the
Xboard Control.
IMPORTANT: Note that banks or patches which are loaded into Xboard Control
from disk files will be immediately downloaded to the Xboard and will overwrite
patches which are stored there.
To Load a Bank or Patch:
1. First select the desired destination patch location in the Bank view.
2. Select Load from File from the File menu. The Open dialog box appears.
3. Locate the folder containing your Banks and Patches. (The default folder is
set in the Preferences menu.)
4. Select the desired Bank or Patch file.
5. Press Open to load the file or Cancel to cancel the operation.
Save Patch
This option allows you to Save Xboard Patches to your hard disk.
To Save a Patch to Disk:
1. First select that patch in the Bank View.
2. Select Save Patch from the File menu. The Save As dialog box appears.
3. Locate the folder where the Patch will be saved. (The default folder is set in the
Preferences menu.)
4. Select Patch files as the type.
5. Click Save to save the Patch or Cancel to cancel the operation.
To Save a Bank to Disk:
1. Select Save Bank from the File menu. The Save As dialog box appears.
2. Locate the folder where the Bank will be saved. (The default folder is set in the
Preferences menu.)
3. Press Save to save the Bank or Cancel to cancel the operation.
Save Revert
Saves a backup file manually. See
Xboard
"Backups" on page 60.
61