E-Mu Xboard 25 Owner's Manual page 59

E-MU Xboard Control
Send Mod Wheel on Zone Channel
Enables or disables the Mod Wheel for each zone. With this enabled, the mod
wheel sends messages across the Zone's assigned MIDI channel.
Send Aftertouch on Zone Channel
Enables or disables Aftertouch for each zone. For more information, on after-
touch, see page 37.
Send Sustain on Zone Channel
Enables or disables the Sustain Pedal for each Zone. With this enabled, the sustain
pedal sends messages across the Zone's assigned MIDI channel. For more infor-
mation, see page
Note Latch Mode Enable
Enables or disables Latch Mode for each zone. This function works in conjunction
with the Latch button on your Xboard.
page 30.
Post Zone Octave Transpose
Enables or disables Octave transpose for each Zone. This setting is relevant only
when Octave Transpose Mode
So, if you disable Post Zone Octave transpose for Zone 1, when you press the
Octave Transpose button on your Xboard, Zone 1 does not transpose.
Not Transposed
Zone 1
A case in which you might want to use this feature is with a drawbar organ synthe-
sizer. You can map Zone 1 to the organ's pedal controllers, and still be able to
access those notes, even when transposing zones 2, 3, and 4.
Xboard
40.
(page
Up Two Octaves
Zone 2
Controller Range Controller Range
See "Latch Mode, Zones Enabled" on
56) is enabled.
Up Two Octaves
Zone 3
Up Two Octaves
Zone 4
59