Samsung NC241 User Manual page 44

2
Using "PCoIP"
OSD Tab
The OSD page allows the screensaver timeout to be set using the
The OSD parameters can also be configured using the Administrative Web Interface.
The OSD
Figure 2-10: OSD
Screen-Saver Timeout
Configure the screensaver timeout before the client sets the attached displays into low-power mode.
You can configure the timeout mode in seconds. The maximum timeout value is 9999 seconds. A
setting of 0 seconds disables the screensaver.
Display Tab
The Display page lets you enable the
This function is only available through the OSD.
Under normal operation, the
determine the monitor's capabilities. In some situations, a monitor may be connected to a client in a way
that prevents the client from reading the
KVM devices. The options in this page configure the client to advertise default
GPU.
Enabling display override forces the default monitor display information to be used which may not be
compatible with the connected monitor resulting in a blank monitor. Only enable display override when
there is no valid EDID information and monitor display characteristics are known.
page is only available on the client. It is unavailable on the host.
Configuration
Extended Display Identification Data(EDID)
GPU in the host computer queries a monitor attached to the zero client to
EDID
On Screen Display
information, such as when connecting through certain
parameter.
override mode.
EDID information to the
44
2 Using "PCoIP"