Table of Contents
Advertisement
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
Note:
Wireless stations configured as in
connect to the modem router or access points. If you want wireless
stations to access any LAN segment, use additional access points in
any LAN segment.
Repeater with Wireless Client Association
In the repeater mode with wireless client association, your modem router sends all traffic to a
base station access point. You can set up the modem router as either the base station
(parent) or as the repeater (child) access point.
Note that the following restrictions apply:
•
You do not have the option of disabling client associations with this modem router.
•
You cannot configure a sequence of parent-child APs. You are limited to only one parent
access point, although if your modem router is the parent access point, it can connect
with up to four child access points.
The following figure shows an example of a repeater mode configuration.
Wireless computer
associated
with AP 1
192.168.0.1
AP 1 (parent AP in repeater mode)
DGND3800
Figure 16. Repeater example
To set up a repeater with wireless client association:
In this example, the modem router is the base station, but you can set it up to be the repeater
with another AP as the base station if you want.
1.
Set up your modem router to be the base station.
a. In the Wireless Repeating Function screen for your modem router, select the Enable
Wireless Repeating Function check box.
b. Select the Wireless Base Station radio button.
Figure 14
on page 102 cannot
AP 2 in repeater mode
AP 3 in repeater mode
Advanced Settings
105
Wireless computer
associated
with AP 2
Wireless computer
ssociated with
P 3
Advertisement
Table of Contents
