Memory Function - Lincoln MKS Owner's Manual

MEMORY FUNCTION

Programming a memory position
Note: A memory position may be programmed at any time.
• To program a position, move the memory features to the desired
positions using the associated controls. Press and hold the desired
memory button for at least two seconds. A chime will sound
confirming that a memory position has been set.
• To program another position, repeat the previous procedure using the
other buttons.
Recalling a memory position
A programmed memory position can be recalled:
• in any transmission selector lever position if the ignition is not on.
• only in position P or N if the ignition is on.
Press the desired memory control to recall a memory position.
Recalling a memory position with the remote control
The memory positions are also recalled when you press unlock on your
remote control (if the transmitter is programmed to a memory position)
or, when you enter a valid personal entry code that is programmed to a
memory position. If the easy entry feature is enabled, the seat will first
move to the easy entry position. The seat will move to the final position
when the key is in the ignition or when the push button start system is
put in accessory mode/started.
To program the memory feature to a remote control, refer to Keys and
remote control.
2013 MKS (mks)
Owners Guide gf, 2nd Printing
USA (fus)
Seats
The memory control, located on the
driver's door, allows positioning
recall of the:
• Driver seat
• Power mirrors
• Adjustable pedals (if equipped)
• Power tilt/telescopic steering
column (if equipped)
135