Table of Contents
Advertisement
Electrical Cord -
For shipping purposes, the electrical
cord is stored inside the tool box . Open lid latches, lift tool
tray up, to remove electrical cord.
LiftTool Tray
ON/OFF Switch.
International symbol I means On,
International symbol O means Off.
NOTE: Always wear safety goggles (not provided). Never
point blower toward people, animals or objects
that may be injured/damaged by flying debris.
These units must NOT be used to power a paint
sprayer or to supply air to any other sprayer.
Blower Port.
Insert larger end of hose into the
blower port to use as a blower.
Accessories -
The accessories are stored on the inside
of the tool box lid. There are diagrams on the inside of the lid
to help with placing them back in the correct location.
1.To use accessories remove hose from top of the lid by
lifting up.
2.Place desired accessory onto end of hose or crevice wand.
Extension Cords
NOTE: If an extension cord is used, make sure the plug
connection does not come into contact with any
liquid. Use a grounded extension cord with 3-prong
plug and 3-pole receptacle; 16 gauge, SJTW-A type.
Loop the cords to prevent unplugging.
Plug round end of electrical cord into the tool box, as shown
above. Plug the other end of electrical cord into electric
socket.
The electrical plug has been designed so an electric tool or
appliance can be plugged directly into it.
Cover unused receptacle when not in use with outlet cover
(attached to cord as shown).
Suction Inlet.
suction inlet to use as a vacuum.
ON/OFF
Switch
Dusting/Upholstery Brush
books, lamp shades, shelves, curtains, draperies, cushions
and fabrics.
Crevice Wand
between cushions.
Outlet
Cover
Insert larger end of hose into
Blower Port
Dusting/
Upholstery
Crevice
Wand
Hose
or
Wand
cleans corners, stairs, baseboards, and
Suction
Inlet
Brush
is for furniture, blinds,
7
Advertisement
Table of Contents
