Configure The Ip Settings - NETGEAR ProSAFE WNDAP380R Reference Manual

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
2. Configure the settings as explained in the following table:
Setting
Time Zone
Current Time
NTP Client
Use Custom NTP Server
3. Click Apply.

Configure the IP Settings

WARNING:
If you enable the DHCP client, the IP address of the wireless
access point changes when you click Apply, causing you to lose
your connection to the wireless access point. You then need to
use the new IP address to reconnect to the wireless access point.
Description
Select the time zone to match your location.
This is a nonconfigurable field that displays the current date and time.
Enable the Network Time Protocol (NTP) client to synchronize the time of the
wireless access point with an NTP server. By default the Enable radio button is
selected.
Select this check box if you want to use a custom NTP server.
Note: You need to have an Internet connection to use an NTP server that is
not on your local network.
Hostname / Enter the host name or IP address of the custom NTP server.
IP Address The default NTP server depends on the selected time zone.
For example, for China the default is time-e.netgear.com.
Note: If you use a host name, make sure that you have
configured a DNS server. For more information, see the next
section.
Installation and Basic Configuration
21