Manual Tuning - Telefunken TTV32PF5 Operator's Manual

Press the AVbutton again to return
AV
to TV.
Tuning the television
There are two ways of tuning your television:
Manual, where you control the tuning process
or
Autoprogram where the television does it all
automatically.
Please Note
If the TV is set to a channel with no signal the
TV will return to standby after 5 minutes.
The time remaining is displayed on the screen.

Manual tuning

8
Tuning the TV is accessed through the
SETUP menu.
There are two ways to access the SETUP
menu:
Press the blue Setup button. or
Press the Menu button and use the
Program down button to select
SETUP. Press the OK button to
enter the SETUP menu.
OK
Please note
The system will display automatically on
SYSTEM row i.e.BG, L, I, DK depending
the receiving broadcasting system of the
country. In some countries the broadcasting
system can be both in BG/DK or BG/LL´.
Only the TV sets produced with Pal Secam
BG/DK or Pal Secam BG/LL´ systems can
receive both BG/DK or BG/LL´ broadcasts.
In this case the user can select the required
SYSTEM using Volume up/down buttons.
Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
In the Setup menu select PROG
NUMBER and change to 01 using
the Program down button to
select it and the Volume up
button to change it.
Starting with Program 01, tune
in the first channel as follows:
Use the Program down button
to select SEARCH.
Press the Volume up or Volume
down button to start the tuning
search.
The search arrow will flash and
the tuning indicator will move up
the scale.
When the search finds a strong
channel signal it will stop
searching. The picture will appear.
Identify which channel you are
watching (BBC 1, ITV 1 etc.) and
decide which program number you
want it to be.
Use the Program down button to
select PROGRAM NUMBER.
Use the Volume up/down buttons
to select the program number.
Use the Program down button to
select Store. Press theOKbutton
and STORED will appear on the
STORE line.
OK
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and
continue the tuning procedure
until you have tuned in all the
programs you want or the
television can receive.