Table of Contents
Advertisement
TUNE MENU
TUNE
CONLOUR SYS
AUTO
SOUND SYS
M
BAND
VHF-L
SKIP
OFF
PROGRAM
2
SEARCH
FINE TUNE
AUTO SEARCH
EXCHANGE MENU
EXCHANGE
PROGRAM
1
PROGRAM
1
EXCHANGE
OPERATION INSTRUCTIONS
You can select the item by press the PROG+/- buttons or the (GREEN) /
(BLUE) buttons, move to the menu you select and then do as follows.
1.COLOUR SYS
Press VOL+/- buttons or (RED) / (YELLOW) buttons to set the colour
System. Australia is PAL B/G.
2.SOUND SYS
Press VOL+/- buttons or (RED) / (YELLOW) buttons to set the sound
system. Australia is 5.5M.
3.BAND
Press VOL+/- buttons or (RED) / (YELLOW) buttons. Y ou can select the
Band VHF-L.VHF-H or UHF .
VHF-L-----VHF-H-----UHF
4.SKIP
Press VOL+/- buttons or (RED) / (YELLOW) buttons to set skip on or off,
when you set skip on. This program will be hidden.
5.PROGRAM
Press VOL+/- buttons or (RED)/(YELLOW) buttons to set the PROGRAM
number.
6.FINE TUNE
For better quality with VOL+/- buttons or (RED) / (YELLOW) buttons.
7.SEARCH
Press VOL+/- buttons or (RED) / (YELLOW) buttons to search for next or
previous available program, the set will automatically stop while the signal
is received.
8.AUTO SEARCH
Press VOL+/- buttons or (RED) / (YELLOW) buttons, the TV set will
automatically search in 3 bands and store every program.
*In AV mode, only COLOUR SYS displayed under this menu.
*After fine tune. The colour of program number will change from GREEN
to YELLOW.
In AV mode ,this item will not be displayed.
Select the item by pressing the PROG+/- buttons or the (GREEN)/(BLUE)
buttons.
1.
PROGRAM 1
Press VOL+/- buttons or (RED) / (YELLOW) buttons to adjust
2.PROGRAM 2
Press VOL+/- buttons or (RED) / (YELLOW) buttons to adjust PROGRAM 2.
3.Press VOL+/- buttons or (RED) / (YELLOW) buttons to exchange
PROGRAM 1 and PROGRAM 2.
-10-
PROGRAM 1.
Advertisement
Table of Contents
