Electrolux EWG 12740 W User Manual page 14

14 electrolux use
After you have pressed the
«Start/Pause» button and the machine
has started, the
lighted-on and only the phase running
icon stays on. The segments inside the
clock icon are animated.
When the programme has finished, a
flashing zero ( 0.00
(Door locked) icon desappears.
Delay
The selected delay (20 hours max) set
by means of the relevant button appears
on the display for about 3 seconds, then
the duration of the previously selected
programme is displayed. The relevant
phase icon is lighted-on.
The delay time value decreases by one
unit every hour and then, when 1 hour
remains, the time decreases every
minute.
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected,
the message Err is displayed at the
bottom of the display for about 2
seconds and the integrated red
«Start/Pause» light start flashing.
(Door locked) icon is
) is displayed and the
Alarm codes
In the event of operating problems,
some alarm codes can be displayed, for
example E20 (see paragraph
"Something not working").
End of programme
When the programme has finished a
flashing zero is displayed, the
locked) icon desappears and the door
can be opened.
Heating phase
During the washing cycle the display
shows the temperature icon animated
to indicate that the appliance has
started the heating phase of the water
in the tub.
(Door