Roadside Emergencies - Ford Ranger Owner's Manual

Hazard Flasher
The hazard flasher is used to alert other drivers to hazardous
situations.
The flashers will flash and the high-mount brakelamp will stay
on steadily (not flash) with the brake pedal depressed.
The flashers work whether your vehicle is running or not. The
flashers work for up to two hours when the battery is fully
charged and in good condition without draining the battery
excessively. If the flashers run for longer than two hours or if
the battery is not fully charged, the battery power can be
drained.
To use the hazard flasher:
Push in the flasher button; it will pop out and the lamps will
1.
begin to flash.
To stop the flashers, push in the flasher button again.
2.
NOTE: The flasher button will be sticking up slightly higher
when on than when off.
Hazard flasher

Roadside Emergencies

217