HP ProLiant SL4540 Specification page 5

QuickSpecs
Standard Features
On System Management
Processor
Memory Protection
Memory
Dedicated to each server
node
Network Controller
One of the following
dedicated to each server
node
Expansion Slots
Primary Riser
Expansion Slots #
Dedicated to each
server node
*Indicates the number of physical electrical lanes running to the connector.
NOTE: One PCIe 2.0 low profile expansion slot is enabled by HP Svr Storage Mezz to PCIe Option Kit 682632-B21 for adding one of the
expansion options including an HP IO accelerator, networking options or external storage controller options.
NOTE: Expansion Slot is hosted in the I/O Module.
HP iLO (Firmware: HP iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo.
Advanced ECC (multi-bit error protection)
Online Spare
Lock Step Mode
Type
DIMM Slots Available
Maximum (RDIMM) (per
server tray)
NOTE: HP SmartMemory is required to realize the memory performance improvements and enhanced
functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: HP certified SmartMemory must be used to guarantee full 1333MHz speeds.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1333MHz or 1066MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator.
HP Ethernet 1Gb 2-port 361i
HP Ethernet 1Gb 2-port 361i and HP Ethernet 10Gb 2P 544i Adapter
NOTE: Dual port ConnectX-3 10GbE or QDR IB
NOTE: Network controller is hosted in the I/O Module
Technology
1 PCIe 2.0
DA - 14406 Worldwide — Version 14 — December 13, 2013
HP ProLiant SL4540 Generation 8 (Gen8) Server
HP SmartMemory
DDR3 Registered (RDIMM)
12 DIMM Slots available
192GB (12 x 16GB) Registered memory configurations
Bus
Connector Width
Width*
X8
Form Factor
X8 Low profile slot
Notes
Page 5