HP StoreEver ESL G3 Specification page 26

QuickSpecs
Technical Specifications
Data rate matching
range
Data access time
(from BOT)
Average load time
Average unload
time
Maximum Storage Native Capacity
Capacity
Compressed
Capacity
Bulk load unload 528 slots
station
NOTE: Minimum of 24 slot I/E station comes with each library. An additional 24-slot or 72-slot I/E station can be
added to any of the Expansion Modules or High Density Expansion Modules up to a maximum of 528 slots.
Initialization Less than 3 minutes, fully loaded with labeled cartridges
(cartridge inventory)
time
Cartridge Swap 18 to 20 seconds, consisting of two Move Medium commands
Time
Input Auto-range to domestic and international AC voltages
Requirements
Nominal / Range
Line Frequency
Range Line Voltage 200 VAC to 240 VAC
Typical Input Current 8A max
Power VA max 1600W (Standard 2N power)
Consumption
Connectors FC
Drives Supported Native Fibre Drives: LTO-6 Ultrium 6650 FC, LTO-5 Ultrium 3280 FC and LTO-4 Ultrium 1840 FC
Maximum Number 12 drives in a single frame up to maximum of 96 drives with multiple expansion frames
of Drives
Acoustic Noise Sound Power Level
54 to 160 MB/s
<19 seconds (RW)
<22 seconds (WORM
<19 seconds (RW)
<22 seconds (WORM-
initialized
17.7 PB
75 PB
NOTE: LTO-6 compressed
data listed above is assuming
2.5:1 compression.
Maximum number of I/E Slots
50 Hz / 60Hz
LC Connector
Operating 7.3 Bel
Idle 7.3 Bel
DA - 14074 Worldwide — Version 16 — November 1, 2013
HP StoreEver ESL G3 Tape Libraries
47-140 MB/s
<19 seconds (RW)
<22 seconds (WORM
<19 seconds (RW)
<22 seconds (WORM-
initialized) Uninitialized
7.5PB
21.3PB
NOTE: LTO-5 compressed
data listed above is assuming
2:1 compression
40-120 MB/s
62 seconds typical for LTO 4
media
<19 seconds (RW)
22 seconds (WORM-
initialized) Uninitialized
WORM media can take up to
70 seconds
<19 seconds (RW)
22 seconds (WORM-
initialized)
Uninitialized WORM media
can take up to 70 seconds
3.75PB
7.5PB
NOTE: LTO-4 compressed
data listed above is assuming
2:1 compression
Page 26