HP StoreEver ESL G3 Specification page 19

QuickSpecs
Configuration Information
check library front panel for HW Revision number. If no "HW Revision" is displayed, this indicates Revision
1.
Only one kit per library is needed regardless of library size.
Kit Includes: Includes gear rails, cables, and controller-board upgrades for both the Control Module and all
Expansion Modules, to allow a second fail-over robot to be added to ESL G3. Also includes two new
"Hardware Revision 2" robots and a Parking Module
HP StoreEver ESL G3 Dual Robot Expansion Kit
NOTE: For libraries purchased after June 2012 (HW Revision 2, with Control Module SKU QQ007B).
check library front panel for HW Revision number. If no "HW Revision" is displayed, this indicates Revision
1.
Only one kit per library is needed regardless of library size.
Kit Includes: One Parking Module and one Hardware Revision 2 robots
HP StoreEver ESL G3 Expansion Module (For HW Revision 1)
Quantity: Up to 15 EM frames maximum per library
1 add-on frame to expand the number of storage slots, I/E stations, and/or tape drives beyond the Base
Configurations above.
NOTE: For libraries purchased before June 2012 (HW Revision 1, with Control Module SKU QQ007A).
check library front panel for HW Revision number. If no "HW Revision" is displayed, this indicates Revision
1.
NOTE: Does not include dual robotics capability
HP StoreEver ESL G3 Expansion Module (For HW Revision 2)
Quantity: Up to 15 EM or HD-EM frames maximum per library
1 add-on frame to expand the number of storage slots, I/E stations, and/or tape drives beyond the Base
Configurations above.
NOTE: For libraries purchased after June 2012 (HW Revision 2 and used with Control Module SKU QQ007B).
HP StoreEver ESL G3 High Density Expansion Module (HD-EM)
Quantity: Up to 15 Expansion Modules or HD-EM frames maximum per library
1 add-on frame to expand the number of storage slots and I/E stations. Drives cannot be added to an HD-
EM. To add drives, please order the ESL G3 Expansion Module.
NOTE: For libraries purchased after June 2012 (HW Revision 2 and used with Control Module SKU QQ007B).
NOTE: High Density Expansion Modules include 780 physical storage slots, zero drives, and a barcode
scanner.
HP StoreEver High Density Expansion Module (HD-EM) Barcode Scanner
Quantity : One per High Density Expansion Module. (HD-EM).
NOTE: For use in the HD-EM only. This will add a second barcode scanner to reduce inventory time. One
barcode scanner is already included with each High Density Expansion Module.
HP StoreEver ESL G3 100-Slot Capacity Upgrade License
Quantity: One license for every 100 slots
Base Configurations above ship with the specified number of slots (100, 300, 700, etc.) already enabled.
To enable additional slots beyond the Base Configuration number, order 1 license for each additional 100
slots you want to enable. Each license enables approximately 100 slots, until the physical maximum
number of slots is reached.
HP StoreEver ESL G3 Redundant (2N) Power Supply
DA - 14074 Worldwide — Version 16 — November 1, 2013
HP StoreEver ESL G3 Tape Libraries
Please
Please
B4J74A
QP007A
QP007B
H5W99A
E3S05A
TC345A
QP008A
Page 19