Preference Setup; Update Software - Philips DCD7010 User Manual

Note
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
Night mode is only available for Dolby
encoded DVD.

Preference setup

1
Press SYSTEM MENU button .
2
Select to access the [Preference Setup]
options.
[Audio]: Select an audio language for
•
video.
• [Subtitle]: Select a subtitle language for
video.
[Disc Menu]: Select a menu language for
•
a video disc.
[Parental]: Set the rating level to a
•
disc. Restrict access to discs that are
encoded with ratings These discs must be
recorded with rating levels.
[PBC]:Display or skip the content menu
•
for VCD and SVCD.
• [MP3/JPEG Display]: Set Mp3 or jpeg
view mode.
[Password]: Set or change a password to
•
play a restricted disc.
• [DivX Subtitle]:Select the language of the
DivX.
[Version Info.]:Display the software
•
version for the .
[Default]:Reset the home theater to
•
the default settings programmed at the
factory.
Note
•
Ensure that the subtitle file has the exact same
file name as the movie file. If for example the
file name of the movie is 'Movie.avi', then
you need to name the text file 'Movie.sub' or
'Movie.srt'.
20 EN

Update software

Before you update the software of this unit,
check the current software version:
Press SYSTEM MENU , and then select
•
([Preference Setup]).
Use navigation button to find [Version
•
Info.], and find out current version.
Update software via USB
1
Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB
storage device.
3
Unzip the download in the root directory.
4
Connect the USB storage device to the
(USB) connector on this unit.
» The unit will read the file automatically.
A box comes out on the TV screen.
5
Follow the instructions on the TV screen
to update the software.
» When the update is complete, this unit
automatically turns off and on again.
Caution
•
Do not turn off the power or remove the USB
storage device when the software update is in
progress because you might damage this unit.
•
You may also burn a disc to update your
software.