Roubleshooting - GE 25898 User Manual

NO DATA
EMPTY
NO CALLS
CALL WAITING
ANSWERER
REMOTE ACCESS
A S
NSWERING
The following messages show the status of the answering system or help
you set up and use the system.
0-59
CL (blinking)
- -
An (blinking)
F (blinking)
Six bars (blinking)
LA (Line Access)
T

ROUBLESHOOTING

C P
ORDLESS HONE
No dial tone
• Check or repeat installation steps:
Make sure the base power cord is connected to a working electrical outlet.
Make sure the telephone line cord is connected to the base and the
wall jack.
• Connect another phone to the same wall jack; if it doesn't work, the
problem might be your wiring or local service.
30
No Caller ID information was received with the call.
Indicates a memory location is vacant.
Indicates no calls have been received.
Indicates a call is waiting on the line.
Indicates the answering system is being
accessed remotely.
D
YSTEM ISPLAY
Indicates the total number of messages.
The voice time/day stamp needs to be set.
Answering system is turned off.
The system is answering a call.
Answering system memory is full.
The system is recording a memo or
an announcement.
External line remote answering system.
T
IPS
S
OLUTIONS
M
ESSAGES