Leds On Side Panel; Figure 3-2: Leds On Side Panel - Cisco Linksys WAG354G(EU) User Manual

Wireless-g adsl home gateway
Table of Contents

Advertisement

Available languages

Available languages

Wireless-G ADSL Home Gateway

LEDs on Side Panel

The Gateway's LEDs, which indicate network activity, are located on the other side panel.

Figure 3-2: LEDs on Side Panel

POWER
Green. The POWER LED lights up when the Gateway is powered on.
WIRELESS
Green. The WIRELESS LED lights up whenever there is a successful wireless connection. If the
LED is flashing, the Gateway is actively sending or receiving data to or from one of the devices
on the network.
ETHERNET (1-4) Green. The ETHERNET LED serves two purposes. If the LED is continuously lit, the Gateway is
successfully connected to a device through the LAN port. If the LED is flashing, it is an
indication of any network activity.
DSL
Green. The DSL LED lights up whenever there is a successful DSL connection. The LED blinks
while the Gateway is establishing the ADSL connection.
INTERNET
Green. The INTERNET LED lights up green when an Internet connection to the Internet Service
Provider (ISP) is established. The INTERNET LED lights up red when the connection to the ISP
fails.
Chapter 3: Getting to Know the Wireless-G ADSL Home Gateway
LEDs on Side Panel
7

Advertisement

Table of Contents
loading

Table of Contents