Expand Your Setup - Bang & Olufsen BeoVision 9 Manual

46
Disconnect from the mains
While expanding your setup, the TV must be
disconnected from the mains.
Remove the cable cover
Remove the cable cover to get access to the
connection panel.
Connect additional equipment
To operate non-Bang & Olufsen products with
Beo5, attach a Bang & Olufsen IR-transmitter to
each product. See also pp. 48-49.
Switch on the TV
Always attach covers before you connect the
TV to the mains.
Information
'AUTO SELECTION'
'TIMER RECORDER'

Expand your setup

Your TV supports a wide range of additional equipment. You can even connect a
projector or a home automation system to control room lights and curtains.
Connect video recorders only to AV1 or AV2.
Switch off TV
Tilt main connection panel for-
ward
Select corresponding socket
marked CTRL
Attach all covers
Automatic selection of connected sources, when the TV is on and detects a signal.
Activate the Timer recording option for a connected recorder. Available if you do not have the optional
Bang & Olufsen hard disc recorder. Only available in the 'AV1' and 'AV2' menus, and can only be
activated in one of these menus at any time.
'HDMI' Equipment connected via an HDMI IN socket. If you have set the 'HDMI EXPANDER' in the
'CONNECTIONS' menu to 'YES', the 'HDMI-C' option in the 'AV' menus is replaced with 'HDMI-C1',
'HDMI-C2', 'HDMI-C3', and 'HDMI-C4'.
Disconnect TV from mains
A
Release the two locks A and
pull off cover
Make the connections
Connect TV to mains supply
B
Press B to open the small door to
sockets for temporary
connections
Switch on TV