The Pincode System - Bang & Olufsen BeoVision 9 Manual

Activate the pincode system
Enter a four digit pincode to activate the system.
Change the pincode
Change the pincode you have chosen.*
Delete the pincode
Delete the pincode you have chosen.
Enter the pincode
If you cannot switch on the TV after
disconnection from the mains, wait 30 seconds
and try again.
If you forget the pincode
Contact your Bang & Olufsen retailer to receive
a five digit mastercode.
1
*Change of pincode If you change your pincode more than five times within a three-hour
period, the 'PINCODE' menu becomes inaccessible for three hours,
assuming that the TV is not disconnected from the mains.
Incorrect pincode Five incorrect entries will cause the TV to shut down for three hours,
during which operation is not possible. Disconnecting the TV resets the
three-hour period.

The pincode system

The pincode system prevents people who do not know the pincode from using
the TV. When the pincode system is activated and the TV has been
disconnected from the mains for 15–30 minutes, the system goes into effect.
Bring up 'TV SETUP'
menu
Bring up 'TV SETUP'
menu
1
Bring up 'TV SETUP'
menu
Enter pincode
Hold when prompted
for pincode to display
2
five fields*
STOP
Enter a four digit
code and accept
Press
Press
twice
Enter pincode,
STOP
accept and select
Press Press
'NEW PINCODE'
twice
STOP
Enter pincode and
Press accept
Press
twice
Accept
Enter five digit Accept to delete pincode, you can now
mastercode
activate pincode system again
NOTE! If you are prompted for a pincode the
first time you switch on your TV, contact your
Bang & Olufsen retailer. To cancel a pincode
entry and clear the input fields, press BACK. On
Beo4, press STOP.
2
*On Beo4 hold
37
Re-enter the code
and accept
Enter new code,
accept, re-enter code
and accept
Select 'DELETE
PINCODE' and accept
to bring up the five fields.