C-Tick Mark; Bsmi Mark; Kc Mark - Hitachi HDS723020BLA642 Specifications

6.10 Electromagnetic compatibility
When installed in a suitable enclosure and exercised with a random accessing routine at maximum data rate,
the drive meets the following worldwide EMC requirements:
 United States Federal Communications Commission (FCC) Rules and Regulations (Class B), Part 15. (A
6 dB buffer shall be maintained on the emission requirements).
 European Economic Community (EEC) directive number 76/889 related to the control of radio frequency
interference and the Verband Deutscher Elektrotechniker (VDE) requirements of Germany
(GOP).Spectrum Management Agency (SMA) EMC requirements of Australia. The SMA has approved
two forms of C-Tick Marking for Hitachi Global Storage Technologies.
6.10.1 CE Mark
The product is declared to be in conformity with requirements of the following EC directives under the sole
responsibility of Hitachi Global Storage Technologies Japan Ltd:
Council Directive 2004/108/EC on the approximation of laws of the Member States relating to electromagnetic
compatibility.
6.10.2

C-Tick Mark

The product complies with the following Australian EMC standard:
Limits and methods of measurement of radio disturbance characteristics of information technology, AS/NZS
3548 : 1995 Class B.
6.10.3

BSMI Mark

The product complies with the Taiwan EMC standard "Limits and methods of measurement of radio disturbance
characteristics of information technology equipment, CNS 13438 Class B."
6.10.4

KC Mark

The product complies with the Korea EMC standard. The regulation for certification of information and
communication equipment is based on "Telecommunications Basic Act" and "Radio Waves Act" Korea EMC
requirement are based technically on CISPR22 measurement standards and limits. KC standards are likewise
based on IEC standards.
Hitachi hard disk drive specifications
45