Check Power Mode (E5H/98H); Table 75. Check Power Mode Command (E5H/98H) - Hitachi HDS725050KLA360 Specifications

12.1 Check Power Mode (E5h/98h)

Table 76: Check Power Mode command (E5h/98h)
Command Block Output Registers
Register
Data
Feature
Sector Count
Sector Number
Cylinder Low
Cylinder High
Device/Head
Command
Error Register
7 6 5
CRC UNC 0
0 0 0
The Check Power Mode command will report whether the device is spun up and the media is available for immedi-
ate access.
Input parameters from the device
Sector Count
7 6 5 4 3 2 1 0
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
1 - 1 D - - - -
1 1 1 0 0 1 0 1
4 3 2 1
IDN 0 ABT T0N AMN
0 0 V 0
This indicates the power mode code. The command returns FFh in the Sector Count Reg-
ister if the spindle motor is at speed and the device is not in Standby or Sleep mode. Other-
wise, the Sector Count Register is set to 0.
Deskstar 7K500 and Deskstar E7K500 Hard Disk Drive Specification
Command Block Input Registers
Register
Data
Error
Sector Count
Sector Number
Cylinder Low
Cylinder High
Device/Head
Status
0 7 6
BSY RDY DF DSC DRQ
0 0 V
111
7 6 5 4 3 2 1 0
- - - - - - - -
see below
V V V V V V V V
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
see below
Status Register
5 4 3 2
COR IDX
0 - - 0
1 0
ERR
- V