Battery Replacement - Sonos CONTROL Product Manual

14

Battery Replacement

After several years (depending upon usage), the battery on your CONTROL may not hold a charge as long as it once did. You
can purchase a replacement battery (visit our Web site at www.sonos.com for more information), and then follow the
instructions below to replace the battery.
Caution: Risk of explosion if battery is replaced by incorrect type. Dispose of used batteries
according to the instructions. (Check with your local waste or recycling company to determine
the proper disposal method in your area.)
Remove the battery door on the back of your CONTROL.
1.
Remove the existing battery by gently pulling the gray battery tab toward you to dislodge the battery, and then lift up to
2.
remove.
Remove the protective wrap from the new battery.
3.
Insert the battery into the battery compartment with the Sonos logo facing out, making sure the battery snaps gently
4.
into place.
Close the battery door.
5.
Place the SONOS CONTROL into the charging cradle to wake it up.
6.
Slide the battery door
back, and then lift it off
Product Guide