Protecting Images - Sanyo VPC-W800 User Manual

Protecting Images

Set the data to read-only to prevent images from being erased by mistake.
Protecting Images
1. Slide the mode switch to [
2. Select the image that you want to protect with the
buttons.
3. Press the MENU button.
The playback menu is displayed.
4. Select [Protect] with the
button.
5. Select [Single] or [All] with the
SET button.
6. Select [Set] with the
button.
Protection is applied to the image and the camera returns
to the playback mode.
The protect icon [
When [All] has been selected, [
images.
EN-36
].
/ buttons, and press the SET
/ buttons, and press the
/ buttons, and press the SET
] is displayed with protected images.
] is displayed with all the
/ Play
MENU:Exit
Play
MENU:Exit
Play
MENU:Exit
SET:Adj.
SET:Enter
SET:Enter