Ford Focus Owner's Manual page 128

Lights
Replacing headlamp bulbs
1. Make sure the headlamp control
is in the off position and open the
hood.
2. Remove the two screw from the
headlamp assembly.
3. Carefully pull the headlamp
assembly up and away from the
vehicle.
Low beam headlamp:
• Remove service cap and
disconnect the electrical
connector.
• Remove bulb from the headlamp
assembly by turning it
counterclockwise, then pull it
straight out.
Install the new bulbs in reverse
order from the steps above. Be sure
that the spring clip is not damaged or detached from the headlamp
assembly during the replacement procedure.
High beam headlamp:
• Remove service cap.
• Remove bulb by removing the
electrical wire connector (lift up
on the bottom latch)
128
2012 Focus (foc)
Owners Guide, 5th Printing
USA (fus)