Client Router Mode - EnGenius ENS500 User Manual

B N S
ASIC ETWORK ETTINGS

Client Router Mode

In Client Router Mode, you can access the Internet wirelessly with the support of a WISP. In AP Router Mode, the ENS500 can
access the Internet via a cable or DSL modem. In this mode, the ENS500 can be configured to turn off the wireless network name
(SSID) broadcast, so that only stations that have the SSID can be connected. The ENS500 also provides wireless LAN 64/128/156-
bit WEP encryption security, WPA/WPA2, and WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security. It also
supports VPN pass-through for sensitive data secure transmission.
Wireless Mode Wireless mode supports 802.11a/n
mixed modes.
SSID Specify the SSID if known. This field is completed
automatically if you select an Access Point in the Site
Survey.
Site Survey Scans nearby locations for Access Points.
You can select a discovered Access Point to establish a
connection.
Prefer BSSID Enter the MAC address if known. If you
select an Access Point in the Site Survey, this field is
completed automatically.
Wireless Security See Configuring Wireless Security.
Click Accept to confirm the changes or Cancel to cancel and return previous settings.
Profile If you used the Site Survey, the Web
Configurator shows nearby Access Points. To
connect to an Access Point, click the Access
Point's BSSID.
Wireless Security See Configuring Wireless
Security.
Click Refresh to scan again.
4-27
C R M
LIENT OUTER ODE