Table of Contents
Advertisement
SP6551 manual - 71238
Replacement and Care of Filters (continued)
c. Install new filters in the filter housing
track with the glue beads of the wicking
pad to the inside of the filter housing.
d. Return the top cover of the filter hous-
ing by installing the cover over the fixed
tabs on the rear of the lower filter hous-
ing and pivoting the cover down over
the top of the filters. Snap the cover
over the two spring tabs.
e. Replace the filter housing in the cabi-
net. Note: There is a front and back ori-
entation. To position the filter housings
correctly:
• Be sure that spring tabs of filter hous-
ings are towards front of cabinet.
• Align the lower portion of the filter
assembly over the six ribs, located at
the bottom rear of the humidifier cabi-
net.
f. Position fan assembly onto the cabinet.
Make sure the fan venturi (lowest cylin-
der section below the fan) is placed
inside the filter housing.
g. Replace water bottles.
h. Close the pivoting lid on the fan
assembly.
i. The unit is ready for use or to be stored
away for the next season.
7/12/05
1:56 PM
Page 10
Spring Tabs
10
Fixed Tabs
Front of
Humidifier
Spring Tabs
Towards Front of Cabinet
Flat Portion of Filter Housing
Towards Back of Cabinet
Spring Tabs Towards Front of Cabinet
Step 4.e.
Filter
Housing
Rear of
Humidifier
Top
Cover
Advertisement
Table of Contents
