Calculation Using Poe Switches - Bosch DCN multimedia Hardware Installation Manual

DCN multimedia
Notice!
Make sure one socket can supply power to the complete redundant chain.
4.3.2

Calculation using PoE switches

Select one or more PoE Ethernet switches to supply power to the multimedia devices. Each
DCNM‑MMD must be connected to an individual PoE enabled output of an Ethernet switch.
Notice!
Some PoE Ethernet switches can only supply power to a limited number of ports. Others can
supply power to every port, but the total power the Ethernet switch can supply is limited.
Please consult the documentation of the PoE Ethernet switch used.
Notice!
If the PoE is used, the DCNM‑MMD cannot be configured as a daisy‑chain; redundant cabling
is not required.
Using PoE, the DCNM‑MMD cannot be daisy‑chained connected. Using PoE does not provide
redundant cabling.
1
Item
1
2
Bosch Security Systems B.V.
2
Description
Network connector
Network/PoE connector
Hardware Installation Manual
System installation design and planning | en 15
2013-08 | V1.0 |