Do you have a question about the 6416 and is the answer not in the manual?
Questions and answers
ΕΥΑΓΓ ΑΓΓΕΛΗΣ
February 11, 2025
παρακαλω δεν ανεβαίνει η κλωστή απο την κατω πομπινα
1 comments:
Mr. Anderson
February 12, 2025
If the thread is not coming up from the lower bobbin on the Singer 6416, check the following issues:
1. Bobbin Placement – Ensure the bobbin is inserted correctly with the thread unwinding in the correct direction, typically counterclockwise.
2. Bobbin Case – Make sure the bobbin case is properly seated and not loose.
3. Threading – Confirm that the top thread is correctly threaded through the tension discs, take-up lever, and needle.
4. Needle Condition – A bent or dull needle can prevent proper thread pickup. Replace the needle if necessary.
5. Handwheel and Hook Timing – Manually turn the handwheel towards you to check if the needle and hook are properly catching the bobbin thread. If not, the machine may need timing adjustment.
6. Tension Settings – Incorrect tension on either the top thread or bobbin can prevent the thread from being pulled up.
7. Lint and Debris – Clean out any lint or debris from the bobbin area, as buildup can block thread movement.
8. Presser Foot Position – Make sure the presser foot is raised when threading the top thread, then lowered before attempting to pick up the bobbin thread.
If none of these steps resolve the issue, the machine may require professional servicing.
Need help?
Do you have a question about the 6416 and is the answer not in the manual?
Questions and answers
παρακαλω δεν ανεβαίνει η κλωστή απο την κατω πομπινα
If the thread is not coming up from the lower bobbin on the Singer 6416, check the following issues:
1. Bobbin Placement – Ensure the bobbin is inserted correctly with the thread unwinding in the correct direction, typically counterclockwise.
2. Bobbin Case – Make sure the bobbin case is properly seated and not loose.
3. Threading – Confirm that the top thread is correctly threaded through the tension discs, take-up lever, and needle.
4. Needle Condition – A bent or dull needle can prevent proper thread pickup. Replace the needle if necessary.
5. Handwheel and Hook Timing – Manually turn the handwheel towards you to check if the needle and hook are properly catching the bobbin thread. If not, the machine may need timing adjustment.
6. Tension Settings – Incorrect tension on either the top thread or bobbin can prevent the thread from being pulled up.
7. Lint and Debris – Clean out any lint or debris from the bobbin area, as buildup can block thread movement.
8. Presser Foot Position – Make sure the presser foot is raised when threading the top thread, then lowered before attempting to pick up the bobbin thread.
If none of these steps resolve the issue, the machine may require professional servicing.
This answer is automatically generated