JGP970TEK/KEK/BEK
GE Profile
36" Built-In Gas Cooktop
™
Dimensions and Installation Information
AGA Requirement: All gas cooktop models require
7/16" free area below cooktop height to combustible
material. Requires 18" minimum from countertop to
adjacent overhead cabinets.
Note: Curved front may interfere with some raised
bullnose countertops. If installing with a GE Profile
TM
Telescopic Downdraft System, consult both cooktop and
downdraft installation instructions packed with product
before installing. Cooktop gas/electric supply may need
to be re-routed to install downdraft.
Electrical Rating: 120V, 60Hz, 5A
Installation With Single Wall Oven Information:
30" Gas Cooktops are approved for use over select GE 27"
and 30" Wall Ovens and Warming Drawers. 30" and 36"
Gas cooktops are approved for use over 30" Wall Ovens
and Warming Drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with
*Allow 5-3/4" depth at rear for electrical and
gas connections
product for current dimensional data.
Installation Information: Before installing, consult
installation instructions, packed with product, for current
dimensional data.
For answers to your Monogram,
GE Profile
or
Dimension and installation information are shown in inches.
®
™
GE
appliance questions, visit our website at
®
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Specification Revised 1/12
230274
Need help?
Do you have a question about the Profile JGP970BEK and is the answer not in the manual?
Questions and answers