The remotes have rolling codes (4 billion codes) to AVs 3010+ prevent scanning and code grabbing devices. The remotes are also The AVS 3010+ can also be triggered from the shock sensor. See waterproof in normal use conditions. Shock Sensor later in this manual.
Page 3
DIsARMING PANIc/cAR fINDeR 1. Make sure the car ignition is turned off. 1. Press the button. 2. Press the button on the remote. 2. The indicators will flash and the siren will chirp three times. 3. The indicators will flash and the siren will sound for 30 seconds. 3.
The code can be set to any number between 5 and 15. We recommend Disable the shock sensor you ask your AVS installer to change it from the factory code to a The shock sensor can be temporarily turned off.
Reed switch The AVS 3010+ and AVS 3010 can be programmed to silently arm and Will trigger if the two halves are moved apart while the disarm. The indicators will still flash. alarm is armed (use to protect ute canopies).
It is most likely the system recognised you did not enter the car so it has Address: automatically re-armed. This feature can be turned off by your AVS installer. the system disarms and the dash lights are working but the car won‘t...
Page 7
AVS and the AVS logo are registered trademarks of Manta Electronics Ltd Po box 302 396 North Harbour North shore 0751 New zealand 00 64 9 476 8052 www.avscarsecurity.com Printed on 100% recycled paper...
Need help?
Do you have a question about the AVS 3010+ and is the answer not in the manual?
Questions and answers