Using A Wall-Mount Bracket - Sony Bravia KDL-55W807A Operating Instructions Manual

Using a Wall-Mount
Bracket
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of the
box as packaged. If the Table-Top Stand is
attached to the TV, the TV may require
detaching the Table-Top Stand; see page 9
(Detaching the Table-Top Stand from the
TV).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety
reasons, Sony strongly recommends that
you use the Wall-Mount Bracket designed
for your TV and the installation should be
performed by a Sony dealer or licensed
contractor.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV's weight.
• Be sure to use the screws supplied with
the Wall-Mount Bracket when attaching
the mounting hooks to the TV set.
The supplied screws are designed as
indicated by illustration when measured
from the attaching surface of the
mounting hook.
The diameter and length of the screws
differ depending on the Wall-Mount
Bracket model. Use of screws other than
those supplied may result in internal
damage to the TV set or cause it to fall,
etc.
8-12 mm
Screw
(supplied with the
Wall-Mount Bracket)
Mounting Hook
Hook attachment on rear of
TV set
20
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
~
• Read the supplied Safety Booklet for
additional safety information.