Panasonic SC-PT170 Operating Instructions Manual page 19

[JPEG] To select "ON" or "OFF" for picture's
J P G
date display
DATE
DATE DISPLAY
To rotate a picture (during pause)
[JPEG]:
0 90
ROTATION
Menu 2 (Video)
NORMAL
CINEMA1:
PICTURE MODE
CINEMA2:
DYNAMIC:
ANIMATION:
To select zoom sizes
NORMAL, AUTO ([DVD-VR] [DVD-V] [VCD]),
[JPEG]: during pause
ZOOM
If you have chosen "480p"/"576p"/"720p"/"1080p"
(progressive), "1080i" (interlaced)
["VIDEO FORMAT" in Menu 5 (HDMI)] or
TRANSFER
"PROGRESSIVE" under "VIDEO OUT (I/P)"
MODE
( 25, VIDEO menu), select the method of
conversion for progressive output to suit the type
of material.
The setting will return to "AUTO" or "AUTO1"
when the disc tray is opened, the unit is turned
off or another source is selected.
When playing PAL discs
AUTO:
VIDEO:
FILM:
When playing NTSC discs
AUTO1:
AUTO2:
VIDEO:
When you select "AUTO" the constructing
method of the DivX contents is automatically
distinguished and output. If the picture is
SOURCE
distorted, select "INTERLACE" or
SELECT
"PROGRESSIVE" depending on which
[DivX]
constructing method was used when the contents
were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
180 270
Mellows images and enhances
detail in dark scenes.
Sharpens images and enhances
detail in dark scenes.
Enhances the contrast for
powerful images.
Suitable for animation.
2,
Automatically detects the film and
video content, and appropriately
converts it.
Select when using "AUTO", and
the content is distorted.
Select this if the
edges of the film
content appear
jagged or rough
when "AUTO" is
selected.
However, if the video content is
distorted as shown in the
illustration to the right, then select
"AUTO".
Automatically detects the film and
video content, and appropriately
converts it.
In addition to "AUTO1",
automatically detects film
contents with different frame rates
and appropriately converts it.
Select if the video content is
distorted when using "AUTO1" or
"AUTO2".
Menu 3 (Audio)
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher,
with the dialogue recorded in the center channel)
DIALOGUE
[DivX] (Dolby Digital, 3-channel or higher, with the
ENHANCER
dialogue recorded in the center channel)
OFF, ON
Menu 4 (Karaoke) [except Australia and N.Z.]
To select "ON" or "OFF" for Karaoke mode
(
[Australia]and]N.Z.]])
KARAOKE MODE
When you select "ON", "PLAY SPEED" (
and the surround sound effects (
work.
Menu 5 (HDMI)
To show HDMI information.
4
HDMI
(
HDMI STATUS
This works when the HDMI connection is being
used with "VIDEO PRIORITY" (
menu) set to "ON".
HD ENHANCER
To sharpen the "720p", "1080i" and "1080p"
picture quality
OFF, 1 (weakest) to 3 (strongest)
This works when the HDMI connection is being
used with "VIDEO PRIORITY" (
menu) set to "ON".
VIDEO FORMAT
To select suitable picture quality with your TV
(Video recordings will be converted to, and output
as, high-definition video.)
This works when the HDMI connection is being
used with "VIDEO PRIORITY" (
menu) set to "ON".
COLOR SPACE
To select suitable picture colour with your TV
(or COLOUR
YCbCr 4:2:2
SPACE)
YCbCr 4:4:4
RGB
If the setting above is not compatible with your
TV, it will not be displayed.
Confirming HDMI information
e.g.
1
2
3
4
5
Connection status
Shows the output signal type.
Shows the number of audio channels.
( above, VIDEO FORMAT)
[ above, COLOR SPACE (or COLOUR SPACE)]
[Note]
When "OFF" is selected in "AUDIO OUT" (
be displayed in "AUDIO STREAM".
21, Enjoying Karaoke [except
below, Confirming HDMI information)
25, HDMI
25, HDMI
480p/576p/720p/1080p (progressive)
480i/576i/1080i (interlaced)
If the picture is distorted, press and hold
[CANCEL] until the picture is displayed
correctly. (The output will return to "480p"/
"576p".)
The numbers displayed depend on the disc
being played. One of the above numbers is
displayed.
25, HDMI
HDMI --- INFORMATION
CONNECTED STATE CONNECTED
AUDIO STREAM PCM
MAX CHANNEL 2ch
VIDEO FORMAT 720p
COLOR SPACE YCbCr 4:4:4
25, HDMI menu), "– – –" will
18)
13) do not
19