Table of Contents
Advertisement
Tools Needed:
• Standard # 2 Phillips screwdriver
• Tape-tipped putty knife
• Needle-nosedpliers
1 Open the door and remove the
filler plugs opposite
file hinges.
2 With the door completely
open,
remove
the bottom
screw from
each hinge
on the dryer face.
6 Rotate
_he door
180 °. Insert
it
on the opposite
side of the open-
ing by moving
the door
IN and
DOWN
until
the top hinge
and
the bottom
hinge
are resting
on
the top screws
inserted
in step
3.
/
3 Insert these screws about halfway
into tile TOP holes, for each hinge,
on the opposite side. (_,%qaere y ou
removed the filler plugs.) Apply
firm pressure to get the screw
started in untapped holes.
4 Loosen the top screw fiom each
hinge on the dryer face halfwa?.
5 With one hand
holding
tile tOF.,
of the door and the other
hand
holding
the bottom,
remove
the
door from the dr_,er by lifting it
UP and OUT.
7 Remove
the remaining
screws
from the side of the opening
from which tile door was
removed.
With these screws
secure e.ach hinge at the bottom.
8 Tighten
the two top screws of
each hinge.
9 Reinsert
the plastic plugs on
the sid e from which the door
was removed.
11
Advertisement
Table of Contents
