Connections
Connections
Connections
Connections
Connections
Connecting the MW/FM aerial
•
Connect the supplied MW loop aerial to the MW socket. Postion the loop aeria to receive the clearest sound.
•
Connect the supplied FM aeria to the FM socket . Move the aerial in various station until the clearest signal is received.
Note
•
Keep the aeria as far away as possible from the TV, AUX or any radiation source to prevent unwanted noise.
•
Full unravel and extend the FM wire aerial for best reception.
•
If you have poor FM reception
For better FM reception, use a 75 ohm coaxial cable (not supplied) to connect the system to an outdoor FM aerial. Or select MONO mode, the reception
will no longer be in stereo but the noise content will be greatly reduced.
Connecting to TV and additional components
•
Use the supplied audio cables to connect AUX socket to the corresponding AUDIO OUT socket on the TV, VCR or other audio/visual components.
SR
SL
DVD
TV/VCR
DVD
SR
SL
DVD
TV/VCR
MW
MW
Page 10