KitchenAid Artisan 5KCG100 Manual page 15

4. Using the burr-cleaning brush,
clean the burr mounted on the
burr-shaft assembly and the
burr mounted within the
motor housing.
NOTE: Never wash the burrs or
burr-shaft assembly in water. Keep
them dry at all times.
Care and Cleaning
5. After cleaning, tilt the burr grinder
6. With the corkscrew-shaped auger
15
backward so the front of the
motor housing faces upward.
shaft facing into the motor
housing, insert the burr-shaft
assembly into the burr grinder.
Keep the burr-shaft assembly
level, so the tip of the auger shaft
will line up with the small socket
in the motor housing.