Daewoo DX-C811N Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Daewoo Manuals
  4. DVR
  5. DX-C811N
  6. Operating instructions manual
Daewoo DX-C811N Operating Instructions Manual

Daewoo DX-C811N Operating Instructions Manual

8 channel dvr
Hide thumbs Also See for DX-C811N:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions
Model : DX-C811N
8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DX-C811N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Daewoo DX-C811N

Summary of Contents for Daewoo DX-C811N

  • Page 1 Operating Instructions Model : DX-C811N...

  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un insulated “dangerous voltage”...
  • Page 3 PRECAUTIONS • Refer all work related to the installation of this product to qualified service personnel or system installers. • Do not block the ventilation opening or slots on the cover. To prevent the appliance from overheating, place it at least 5 cm (2 inches) away from the wall. •...

  • Page 4: Table Of Contents

    Contents ¥° Controls 1. Front Panel ------------ 6 2. Rear Panel ------------ 8 3. Remote Controller ------------ 9 Installation & Connections ¥± ----------- 10 1. Camera, Monitor, Microphone, Alarm sensor and Power cord 2. Alarm inputs and Alarm outs 3. PAN/TILT/ZOOM Camera connections PC system requirement for NETWORK Connection Operation ¥²...
  • Page 5 13. Network Set ------------- 35 14. Information & Log List ------------- 36 15. Zoom ------------ 37 16. PAN/TILT/ZOON Camera Control ------------- 37 17. External Backup Device Control (DAT24) ------------- 38 Client Program ¥³ 1. How to install and connect? ------------- 41 2.

  • Page 6: Front Panel

    ¥° Controls 1. Front Panel Controls 8 10 POWER button Press this button to turn the power on; press again to turn the power off. The POWER LED (red) lights/goes off when the power is on/off. It flashes when switching during initializing and disk checking.
  • Page 7 Pressing cursors can move this zoom area. MENU button Press this button to display the MAIN MENU screen. It is also used as EXIT button to exit all kinds of OSD screen. 10) CLEAR button. In Zoom mode, pressing this button reduces the image. In stop mode and playback mode, pressing this button disappears time &...

  • Page 8: Rear Panel

    2. Rear Panel Connectors COMPOSITE AC IN CAMERA S-VIDEO 100V 230V VIDEO OUT AUDIO ETHERNET RS-232C 1) CAMERA IN connectors These are BNC input connectors for 8 cameras 2) VIDEO OUT connectors A BNC standard composite video output connector 3) AUDIO OUT connector This is an RCA output for an audio signal.

  • Page 9: Remote Controller

    3. Remote Controller DVR ID STANDBY/ON POWER Option (Not used) Pan/Tilt/Zoom ZOOM P/T/Z AUDIO-PB Zoom AUDIO-PB Number/Letter DISPLAY DISPLAY/QUAD MENU MENU ENTER CANCEL CURSOR TIME SEARCH ALARM SEARCH L-SEARCH LIST SEARCH RESTORE STEP BACKUP RESTORE Field by Field BACKUP PLAY PLAYBACK STOP TIMER...

  • Page 10: Installation & Connections

    Installation & Connections. ¥± 1. Camera, Monitor, Microphone, Alarm sensor and Power cord. MONITOR SENSOR#1 CAMERA#1 Up to 8 cameras ALARM IN VIDEO OUT S-VIDEO OUT COMPOSITE CAMERA S - V I D E O VIDEO OUT AUDIO AUDIO OUT ETHERNET RS-232C MIC IN...

  • Page 11: Pan/Tilt/Zoom Camera Connections

    3. PAN/TILT/ZOOM Camera ) C&B Technology (Model: PTZ102) 2) The other models: as buyers request; the camera sample and protocol should be supported. C O M P O S I T E CAMERA S-VIDEO V I D E O O U T AUDIO ETHERNET RS-232C...

  • Page 12: Operation

    Operation ¥² 1. Time / Date Setting 1) When the DVR is turned on, ‘ TIME/DATE SET’ menu appears after initializing . 2) Then enter Time & Date with numeric buttons (0-9). After that, press the “Menu” button to set-up and exit. <**>...

  • Page 13: Live View

    3. Live View 1) Live view mode switching Press the ‘ QUAD’ (ï£Ï¢) Button to switch display modes : 9 à 6à8 à Quad To switch one of small view to main view on 6 or 8 channel display mode - Press the “NO 9”...
  • Page 14 3) Brightness, Contrast & Color adjustment è a. Press the “MENU” button to go in the “ MAIN MENU” b. While the “DISPLAY SET” flashes press the„ button or turn the SHUTTLE ring to the right to enter c. Press the € button to move the cursor to the “CAMERA SELECT”. d.
  • Page 15 COLOR - Camera number can be switched by pressing the number buttons (1,2,3~8) - The contrast of each camera can be adjusted by pressing t u buttons or by turning the SHUTTLE ring SEQ. BYPASS YES, or NO (Camera By If the SEQ.

  • Page 16: Basic Recording

    4. Basic Recording. è 1) Press the “MENU” button to go into the “ MAIN MENU” € Press the button to move the cursor to the “RECORD GROUP SET” 3) While the “RECORD GROUP SET” flashes press the„ button or turn the SHUTTLE ring to the right to enter 4) Then, set the picture quality and recording rate of each camera.
  • Page 17 <Note> Recording Speed setting. Recording Speed (F/S) ¨ç NTSC 30F/S(PAL: 25F/S) : Only for Channel 1 and 2. … 1-30 1-15 1-10 … 1-30 1-15 1-10 If you select the real-time recording speed (NTSC: 30F/S, … 1-15 1-10 PAL: 25F/S), it automatically makes disable to record for the …...
  • Page 18 Indicate there is Video Loss Recording Mode Indicate there was Power Loss Current Recording Channels : Turn to Yellow color Estimated Recording Time Month, Date, Year, Day, Time Available HDD space <Note>Estimated Recording Time varies due to picture quality and capture rate and is updated every 20 seconds due to variation of picture size.

  • Page 19: Alarm Recording

    5. Alarm Recording è 1) Press the “MENU” button to go into the “ MAIN MENU” 2) Press the € button to move the cursor to the “ALARM RECORD SET” 3) While the “ALARM RECORD SET” flashes press the„ button or turn the SHUTTLE ring to the right to enter.
  • Page 20 Select a sensor you wish to determine input and output type of ALARM INPUT SENSOR1 the alarm. SENSOR1 ©ª SENSOR2 ©ª SENSOR3 ©ª SENSOR4 SENSOR5 ©ª SENSOR6 ©ª SENSOR7 ©ª SENSOR8 : Alarm recording OFF. INPUT TYPE N.C (Normally Closed): Accepts alarm signals in the open state. N.O (Normally Open): Accepts alarm signals in the closed state.

  • Page 21: Pre Recording

    6. PRE-Recording è Press the “MENU” button to go into the “ MAIN MENU” Press the € button to move the cursor to the “RECORD SET” While the “RECORD SET” flashes press the„ button or turn the SHUTTLE ring to the right to enter Press the €...

  • Page 22: Schedule Recording

    7. Schedule Recording (Timer Recording) è è ** Before Schedule Table setting, you need to pre-determine 4 different recording modes (Group 1-4); refer “Basic Recording” è è Press the “MENU” button to go into the “ MAIN MENU” € Press the button to move the cursor to the “SCHEDULE RECORD SET”...
  • Page 23 MODE NO : inactivate the recording. GROUP1 ~ GROUP4 : select one of groups. Deletion: To delete each line, select the MODE as ‘ ------‘ then exit to menu. (Use No 6 button on Mode) <Note> The recording time is set by 24H. You need to set 2 days if the setting is over one day. The recording would not start when Ending time is ahead of Start time To complete the setting and exit, press MENU button or SHUTTLE HOLD button.

  • Page 24: Motion Detection Recording

    8. Motion Detected Recording (MOTION RECORD) è 1) Press the “MENU” button to go into the “ MAIN MENU” 2) Press the € butto n to move the cursor to the “RECORD SET” 3) While the “RECORD SET” flashes press the„ button or turn the SHUTTLE ring to the right to enter 4) Press the €...
  • Page 25 ITEM DEFAULT ADJUTMENT Level 1: Low sensitivity~ Level 15: High sensitivity MOTION SENSITIVITY <Note> Motion sensitivity also varies upon on the number of blocks you select Recording 40 SEC Select recording duration when motion is detected Duration 20 SEC– 40 SEC – 60 – 80 – 100 – 120 – 180 – 240 SEC 10) Go to the “RECORD GROUP SET”.

  • Page 26: Time & Date Search

    9. TIME SEARCH – Time and Date Search Note: If an external USB HDD is connected to the DVR, choose which HDD you want to search on the SYSTEM SET menu (à BACKUP SET à PLAYBACK HDD à Internal HDD or External HDD) 1) Press the TIME SEARCH button to display the TIME SEARCH menu.

  • Page 27: Playback

    5) Place the cursor to the desired time you wish to play back using the p, q, t, u buttons and then, press the PLAY or TIME SEARCH button to play back. 10. PLAYBACK 1) Basic Playback a) Press the PLAY button while recording or in stop mode. The oldest recording file on the hard disk is played back when you press the PLAY button for the first time after the power is turned on.

  • Page 28: 2) Reverse Playback

    In Playback Mode Playing back audio Current Channel Playing back Alarm Recording 2) Reverse Playback (a) Press the PLAY button again while playback. The unit begins reverse playback. (b) To resume playback press the PLAY button again. Reverse Playback 3) Field by field (Still field) Playback a) Press the STILL button during playback.

  • Page 29: 4) Adjusting Playback Speed

    4) Adjusting Playback Speed a) SHUTTLE ring; The SHUTTLE ring can be used to adjust the playback speed. Playback speed will vary according to how far the SHUTTLE ring is turned. FORWARD REVERSE ¨ë ¨ì ¨ê STILL ¨é ¨í ¨è ¨î...

  • Page 30: Alarm / Motion List Search

    5) Audio playback (AUDIO-PB) a) Image recording varies as capture rate set. Howe ver, audio is recorded in real-time always. Therefore, in playback mode audio may not be played properly depending on recorded field rate. b) While playback press the AUDIO -PB button to synchronize the sound track with the scenes.

  • Page 31: System Set

    12. SYSTEM SET è 1) Press the MENU button or SHUTTLE HOLD button to display the MAIN MENU. And then, go to the SYSTEM SET using pq buttons or the JOG dial. 2) Press the u button or turn the SHUTTLE ring to the right while the SYSTEM SET flashes.
  • Page 32 **Important: If you wish to format the HDD while using, please follow the steps below. 1. Stop the DVR completely and power off. 2. Restart the unit. 3. Format the HDD on the SYSETM SET menu. After that, restart the unit again Then, HDD formatting is completed.
  • Page 33 Note: This menu will not be selected if there is no external USB device connected. ITEM DEFAULT ADJUTMENT BACK UP MANUAL - MANUAL: The recorded data within a certain time range can be MODE back up to the peripheral storage only when the BACKUP button is pressed.
  • Page 34 <ID List> ID No Manufacturer Model Name C&B Tech CNB -PTZ102 Merit Lilin Ent PIH-7000/7600 Orbiter Microsphere SAMSUNG SCC641 NC-21D SUNKWANG SK2107 SUNIN /WONWOO PT-101 LPT A100 (LG) P/T/Z HONEYWELL GC-655N PELCO D-PROTOCOL :2400bps PELCO D-PROTOCOL :4800bps PELCO D-PROTOCOL :9600bps CANON VC-04 DIGITAL VIDEO RECORDER...

  • Page 35: Network Set

    13. NETWORK SET 1) LAN CONNECT -Connect LAN Cable to Ethernet Port on the Rear. 2) Set UP IP Address è è è Press the MENU button or SHUTTLE HOLD button to display the MAIN MENU. And then, go to the NETWORK SET using pq buttons or the JOG dial.

  • Page 36: Information & Log List

    14. Information & Log List 1) Information a) Press the INFO button on the front panel of unit or on the remote controller to display. b) It shows current recording information. c) To exit press the MENU button. 2) LOG LIST a) Press the INFO button twice to display the log list b) It displays up to 4 pages and each page displays up to 10 lists.

  • Page 37: Zoom

    ZOOM Note: The ZOOM button is not activated when a menu is displayed on the screen. 1) Press the ZOOM button to display the Zoom Area Box. 2) Move the box to the desired position using the p, q, t and u buttons. 3) Press the ZOOM button to enlarge the desired area.
  • Page 38 17. External Backup Device control (USB DISK type) A. Auto external device detection. 1) Connect an external backup device to the DVR while DVR is in ‘ STOP’ mode. 2) The DVR unit detects the external backup device automatically within 15 sec and the external backup device icon appears on the monitor screen.
  • Page 39 C. When a CD-RW is connected. 1) Set the BACK UP mode as MANUAL on the SYSTEM SET menu. è è 2) Exit the menu. 3) Press the BACKUP button, then the BACKUP TIME SET mode appears as picture below. 3) Now, set the starting and ending times.
  • Page 40 D. Backup Search (Time-Search, Alarm-Search, Playback) - When an External USB HDD is connected. è è 1) Press the MENU button and go to the SYSTEM SET menu. 2) Then, go to the ‘ BACK UP SET’ . 3) Select as EXTERANAL on the PLAYBACK DISK menu. 4) Press the MENU button to exit the menu.

  • Page 41: How To Install And Connect

    Client Program ¥³ 1. How to install and connect (1) Installation – it is automatically downloaded when you access to DVR. Enter the DVR IP address. Then ‘ ActiveX control’ window appears. Click ‘Yes’ . - or the Client S/W can be installed with the CD enclosed. B.
  • Page 42 (2) Installation By CD. A. Insert “Network Software CD” to CD-ROM of your PC and Find “SETUP.EXE” B. Double Click “SETUP. EXE” C. Click “Install” D. Click ¡¸Close¡¹Button after below images appears. E. The ICON of DVR LOCAL PLAYER ¡¹will be displayed on your PC. DIGITAL VIDEO RECORDER...

  • Page 43: Features

    2. Features (1) Main Screen (A): Tool bar; - control buttons (B): Main View – Live. (C): Current DVR Status. (2) Tool Bar u (A) n Client Setup: 1) Web Client Version Check 2) Live Record Set up: Select Live Record file Size and Save Place n DVR Setting: Click to change the DVR setting.
  • Page 44 u (C) n PRINT: Click to print the current still image. n Live Record: Click to record the current live images. u (D) n PTZ Camera : PAN/ TILE/ZOOM control button. PLAYER: Local player; click to playback the images file downloaded from the DVR server.

  • Page 45: Image File Down Load From The Dvr Server

    3. Image file down load from the DVR server. (1) Click the ‘ File Manager’ button on the tool bar Then, the image file list appears. (3) Select one of the files you wish to down load. Preview: Click to preview the images without downloading. Press Stop button to stop preview.(It automatically stopped when preview is done) <note>...

  • Page 46: Dvr Setting

    4. DVR Setting (1) Click the ‘ SETUP’ button on the Tool bar DVR Setting: To change the DVR setting, enter the supervisor password. <Note> Password: It is different from the DVR’ s password. It is a network password for supervisor to allow changing DVR setting from the remote place via network connection.
  • Page 47 u DVR Control n REC: DVR recording ON n STOP: DVR recording STOP n SCHEDULE ON: Schedule recording ON/OFF u Supervisor Password Management (Network password) n New Password Confirming the New Password (4) DVR SETUP (Camera) CAM 1 ~ 8: Camera selection. Brightness: 0 ~ 99 Contrast: 0 ~ 99...
  • Page 48 (5) DVR SETUP (Record Setting) GROUP 1 ~ 4: Recording Group selection. Audio Recording selection Repeat Recording on / off. Motion Sensitivity: motion level setting. (6) DVR SETUP (Record-group setting) Group selection: 1 – 4 QUALITY: Picture quality Camera 1 ~ 8: Recording speed of each camera.
  • Page 49 (7) DVR SETUP (alarm-recording setting) Alarm Duration: 20~240 Sec REOCRD CAMERA -All Camera: start recording of all cameras when alarms triggered. -1:1 Camera: If alarm No.1 is triggered, only camera 1 will be recorded. AUDIO RECORD: Audio recording on/off ALARM BUZZER: alarm buzzer on/off ALARM OUT : level ALARM ONPUT: SELECT INPUT TYPE : N.O, N.C, OFF...

  • Page 50: Local Player

    5. Local Player (1) Click the “Player” button on the tool bar to open ‘ DVR Player’ window. Click the ‘Open’ button. (3) Select an image file (.ADV or .ADB) and click ‘ Open’ button. DIGITAL VIDEO RECORDER...
  • Page 51 u (A) MAIN: Open, Print, Display of Video Type u (B) Camera Selection . (C) Display of Picture quality (D) Display Mode (E) Save a snap image as JPEG., GIF , BMP or PNG <note> It is saved as same as display mode which you are watching. (F) Operation Buttons (G) PRINT DIGITAL VIDEO RECORDER...

  • Page 52: How To Connect Modem

    How to connect modem ¥µ **<<Recommended external modem : US-ROBOTICS, Model ID: 5686>> Please follow the next procedure after installed client software. We provide client software in a CD. 1. Connect modem (US-Robotics) to the back of DVR RS-232C. 2. Follow the below steps: Start ? Programs ? Accessories ?
  • Page 53 3. Double click “Make New Connection”. 4. Click “Next” at the window of network connection wizard. DIGITAL VIDEO RECORDER...
  • Page 54 5. Check “Dial-up to private network” and click “Next”. 6. Enter the telephone number, which is connected, to the DVR DIGITAL VIDEO RECORDER...
  • Page 55 7. Check “For all user” and click “Next” 8. Type DVR at the parameter, check “Add a shortcut to my desktop” and click “Finish” DIGITAL VIDEO RECORDER...
  • Page 56 9. Type “dvr” at the user name and enter the password(Six digits 000000 are initial password) click “Dial” 10. You can find this window if connection is succeed and see the speed of this connection at the bottom tool bar. To the next, Run Internet Explorer The highest speed of analog modem is 33.6kbps between DVR and the Computer.
  • Page 57 11. Enter this IP address 192.168.0.60 and press Enter key. 12. You can find DVR Connect Dialogue if the program is installed successfully. And click “Connect” button. DIGITAL VIDEO RECORDER...
  • Page 58 13. Enter this password (Six digits 000000 are initial password), click “Advance”, check “Modem user” and click “Connect”. 14. You can see the picture if connected successfully. DIGITAL VIDEO RECORDER...
  • Page 59 15. To disconnect modem, place the cursor on the this Icon and right-click and click “Disconnect” 16. To connect modem to the DVR, just double click the icon of DVR. DIGITAL VIDEO RECORDER...

  • Page 60: Specification

    Specification & Contents ¥¶ 1. SPECIFICATION Video Input 8 (NTSC/PAL) Video Output 1 Monitor, 1 S-Video Loop Out None Live& Playback Display 1,4, 6,7,8,9, PIP Compression WAVELET Live Display Resolution NTSC 720*480, PAL 720*576 Record & Playback Resolution NTSC 720*243, PAL 720*288 Alarm In/Out Operating System EMBEDDED LINUX...
  • Page 61 2. Contents CONTENTS QUANTITY REMARK DIGITAL VIDEO RECORDER 1 UNIT REMOTE CONTROLLER BATTERY (AA size) POWER CORD INSTRUCTION MENUAL DIGITAL VIDEO RECORDER...

Table of Contents