Blackstar S1-104EL34 Owner's Manual
Hide thumbs Also See for S1-104EL34:
Table of Contents

Advertisement

Available languages

Available languages

Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK
For the latest information go to: www.blackstaramps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement
and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S1-104EL34 and is the answer not in the manual?

Questions and answers

Summary of Contents for Blackstar S1-104EL34

  • Page 1 For the latest information go to: www.blackstaramps.com Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.
  • Page 2 Owner’s Manual Designed and Engineered by Blackstar Amplification UK...
  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  • Page 5 Before switching the unit on, it is recommended that that the unit me allowed to reach room temperature. Unauthorised modification of this equipment is expressly forbidden by Blackstar Amplification Ltd. Never push objects of any kind into ventilation slots on the equipment casing.
  • Page 6 If the product does not operate normally, when the operating instructions are followed, then refer the product to a qualified service engineer. The U.S. Government' s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures: Duration Per Day In Hours Sound Level dBA, Slow Response or less...
  • Page 7 Blackstar product. If you like what you hear and want to find out more about the Blackstar range of products please visit our website at www.blackstaramps.com Thanks!
  • Page 8: Overdrive

    Even at the most extreme settings, the overdrive channels remain natural sounding. The Patent-Applied-For ISF control is unique to Blackstar Amplification and represents a major step forward in tone shaping flexibility. The ISF control shifts the response of the three control tone stack between at one end a US response and at the other a UK response.
  • Page 9: Overdrive

    Front Panel 1. Input Plug your guitar in here. Always use a good quality screened guitar lead. Clean Channel 2. Clean Indicator When the green LED is on the Clean Channel is selected. 3. Clean Select Press this switch to select the Clean Channel. 4.
  • Page 10 8. Crunch Select Press this switch to select the Crunch Channel. 9. Crunch Gain The Crunch Gain control adjusts the amount of the Crunch Channel’s overdrive or distortion. Low settings, counter clockwise, will deliver a clean sound on the edge of break-up.
  • Page 11 15. ISF (Infinite Shape Feature) The ISF control works in conjunction with the Bass, Middle and Treble controls. It allows you to choose the exact tonal signature you prefer. Fully counter clockwise has a more American characteristic with a tight bottom- end and more aggressive middle, and fully clockwise has a British characteristic which is more ‘woody’...
  • Page 12 Overdrive 1 and Overdrive 2 Channel EQ 24. Bass The Bass control adjusts the amount of low-end frequencies in your tone. This amp has an advanced tone shaping circuit which allows the tone to be tight and cutting, counter clockwise, to warm and thumping, clockwise. 25.
  • Page 13 30. Volume This controls the overall volume of your amplifier. Turning it clockwise increases the volume. 31. DPR (Dynamic Power Reduction) The DPR control allows the output power of the S1-104 to be reduced anywhere from 100W (100%) down to 10W (10%) of the rated power. DPR works by controlling the power supply voltages to the 100W output valves and also the level of drive signal into the power amplifier stage.
  • Page 14 Crunch DPR Operation The DPR control allows you to pin-point exactly how much valve overdrive you want to come from the preamplifier section and how much is coming from the valves in the power amplifier section. Channel Channel Channel Master Description/ Gain Volume...
  • Page 15: Table Of Contents

    MIDI Channel Switching The Series One offers the ability to control channel selection via MIDI Program Change messages and interfacing with most MIDI controllers is a straight forward process. The Series One can be placed in a MIDI chain allowing you to simultaneously select a channel on the amplifier and change the patch on a MIDI effects processor connected to the effects loop.
  • Page 16 Program Change Assignment To change the default assignments and set the amp up to respond to a different set of Program Changes: 1. The amp must be powered on with either the Standby switch set to on, a jack in the Input socket, or both. 2.
  • Page 17 MIDI Dump Out You may wish to back up the MIDI channel select settings so you can transfer them to another amplifier, for example. To do this you will need a MIDI Sysex librarian, which is usually a piece of software running on a PC or MAC with a suitable MIDI interface.
  • Page 18: Rear Panel

    Rear Panel 1 . Mains Input The supplied detachable mains lead is connected here. The lead should only be connected to a power outlet that is compatible with the voltage, power and frequency requirements stated on the rear panel. If in doubt get advice from a qualified technician.
  • Page 19 7. Impedance Selector This control matches the amplifier’s impedance to that of the connected speakers. Always ensure that the selected impedance matches that of the speaker cabinets connected. See table below. Cabinets Connected Impedance Selected 1 x 16 Ohm cabinet 16 Ohms 2 x 16 Ohm cabinets 8 Ohms...
  • Page 20 S1-104EL34 Technical Specification Power (RMS): 100 Watts Valves: 4 x EL34, 3 x ECC83, 1 x ECC82 Weight (kg): 27.2 Dimensions (mm): 705 x 285 x 278.5 Footswitch: FS-3 supplied S1-1046L6 Technical Specification Power (RMS): 100 Watts Valves: 4 x 6L6, 3 x ECC83, 1 x ECC82 Weight (kg): 27.2...
  • Page 21 Umgebung an einen wärmeren Ort bewegt wird. Es wird empfohlen, dass das Gerät vor dem Einschalten Zimmertemperatur erreicht. Unerlaubte Änderungen an diesem Gerät sind ausdrücklich von Blackstar Amplification Ltd verboten. Stecken Sie niemals Objekte jeglicher Art in die Lüftungsschlitze des Gehäuses.
  • Page 22 Hohe Lautsprecherpegel können permanente Hörschäden verursachen. Sie sollten daher die direkte Nähe zu Lautsprechern, die auf hohen Pegeln betrieben werden, vermeiden. Tragen Sie einen Hörschutz, wenn Sie kontinuierlich hohen Pegeln ausgesetzt sind. Wenn das Produkt nicht normal funktioniert, während die Betriebsanleitung befolgt wird, übergeben Sie das Produkt an einen qualifizierten Servicetechniker.
  • Page 23 Einleitung Vielen Dank, dass Sie sich für den Blackstar Series One Verstärker entschieden haben. Dieser Amp ist wie alle unsere Verstärker das Ergebnis unzähliger Stunden akribischer Arbeit durch unser erstklassiges Entwickler-Team. Blackstar hat seinen Sitz in Northampton (UK) und setzt sich aus einem Team erfahrener Musiker zusammen, die nur ein Ziel verfolgen: Gitarristen mit den Werkzeugen zu versorgen, die ihnen dabei helfen, sich selbst zu verwirklichen.
  • Page 24 Natürlich liegen zwischen diesen beiden Charakteristika unendlich viele andere Klangfärbungen, die bei anderen Verstärkern definitiv nicht zur Verfügung stehen. Komplettiert wird das Klangspektrum durch eine weitere, von Blackstar zum Patent angemeldete Neuerung – das DPR-System (Dynamic Power Reduction). DPR senkt die Leistung der Ausgangsstufe von 100 % (100W) stufenlos auf bis zu 10% (10W) ab.
  • Page 25 Vorderseite 1. Eingang Hier schließen Sie Ihre Gitarre an. Verwenden Sie in jedem Fall hochwertige geschirmte Gitarrenkabel. Clean-Kanal 2. Clean-Anzeige Wenn die grüne LED leuchtet, ist der Clean-Kanal aktiv. 3. Clean-Wahlschalter Mit diesem Schalter aktivieren Sie den Clean-Kanal. 4. Clean Gain Mit dem Gain-Regler steuern Sie den Übersteuerungs- oder Verzerrungsgrad im Clean-Kanal.
  • Page 26 Crunch-Kanal 7. Crunch-Anzeige Wenn die gelbe LED leuchtet, ist der Crunch-Kanal aktiv. 8. Crunch-Wahlschalter Mit diesem Schalter aktivieren Sie den Crunch-Kanal. 9. Crunch-Gain Mit dem Crunch-Gain-Regler steuern Sie den Übersteuerungs- oder Verzerrungsgrad im Crunch-Kanal. Niedrige Einstellungen (gegen den Uhrzeigersinn) liefern einen cleanen Sound mit viel Druck und Durchsetzungsvermögen.
  • Page 27 14. Treble Mit dem Regler Treble können Sie gezielt der Höhenanteil im Gesamt-Sound einstellen. Bei niedrigen Einstellungen (gegen den Uhrzeigersinn) erhält der Sound einen wärmeren und dumpferen Charakter. Wenn der Treble-Regler angehoben wird (im Uhrzeigersinn), wird der Sound immer höhenreicher. In der Maximalposition klingt der Sound schließlich aggressiv und schneidend.
  • Page 28 22. Overdrive 2 Gain Mit dem Overdrive-2-Gain-Regler steuern Sie den Übersteuerungs- oder Verzerrungsgrad im Kanal Overdrive 2. Niedrige Einstellungen (gegen den Uhrzeigersinn) liefern einen cleanen Sound mit viel Druck und Durchsetzungsvermögen. Wenn der Gain-Regler aufgedreht wird (im Uhrzeigersinn), nimmt der Verzerrungsgrad mehr und mehr zu und wechselt von crunchigen Sounds bis hin zu einem stark übersteuerten Lead-Sound in der Extremposition.
  • Page 29 Master 28. Resonance Mit dem Regler Resonance steuern Sie die grundlegende Basswiedergabe des S1-104. Bei niedrigen Einstellungen klingen cleane Sounds knackig und funky, während bei angezerrten Sounds die Basswiedergabe angehoben wird. Bei höheren Einstellungen klingen Clean-Sounds voll und warm, während sich Crunch-und Overdrive-Sounds durch wuchtige Bässe und Druck auszeichnen.
  • Page 30 DPR im Clean-Betrieb Mit dem DPR-Regler lässt sich die dynamische Kompression der Endstufe extrem genau einstellen. Kanal Kanal Kana Master Beschreibung/Klangcharakter Gain Volume Volume Clean Niedrig Mittel Mittel Hoch Ein maximaler Headroom bei der Vor- und Endstufe sorgt für extrem dynamische Clean-Sounds. Clean Niedrig Hoch Hoch...
  • Page 31: Overdrive 2 51

    33. Standby Mit diesem Schalter aktivieren Sie die Ausgangsstufe. Schalten Sie den Standby frühestens 30 Sekunden nach dem Power-Schalter (34) ein. Während kurzer Spielpausen können Sie den Verstärkerausgang mit diesem Schalter an- und abschalten. 34. Power Mit diesem Schalter schalten Sie den Verstärker ein bzw. aus. Aktivieren Sie diesen Schalter in jedem Fall vor dem Standby-Schalter (33).
  • Page 32 Programmwechsel-Zuordnung So ändern Sie die vorgegebenen Zuordnungen und stellen den Verstärker ein, so dass er auf andere Programmwechselbefehle reagiert: 1. Der Verstärker muss eingeschaltet sein. Zusätzlich muss der Standby-Schalter (23) auf ON gestellt und/oder ein Kabel an der Input-Buchse eingesteckt sein. 2.
  • Page 33 5. Um die gewünschte Auswahl zu speichern, lösen Sie den Wahltaster Super OD2 (21) aus. Die LED OD2 (20) blinkt daraufhin viermal schnell, wenn der Vorgang abgeschlossen ist. Das Gerät kehrt in den Normalbetrieb zurück und kann nun nur über Programmwechselbefehle auf dem neu gewählten MIDI-Kanal angesprochen werden.
  • Page 34 Wiederherstellen der Werkseinstellungen So setzen Sie den Verstärker auf die Werkseinstellungen zurück: 1. Drücken und halten Sie die Wahltaster für Crunch (8) und OD2 (21) bei ausgeschaltetem Verstärker. 2. Halten Sie die Tasten weiterhin gedrückt und schalten Sie den Verstärker ein. Nach zwei Sekunden leuchten alle Kanalauswahl-LEDs einmalig auf, um das Zurücksetzen auf die Werkseinstellungen zu bestätigen.
  • Page 35 6. MIDI In Wenn Sie den Kanal über MIDI umschalten möchten, schließen Sie das MIDI-Gerät hier an. Weitere Einzelheiten finden Sie im Abschnitt zur MIDI-Kanalumschaltung. Verwenden Sie in jedem Fall hochwertige MIDI-Kabel. 7. Impedance-Wahlschalter Mit diesem Schalter passen Sie die Impedanz des Verstärkers an den Lastwiederstand des Lautsprechers an.
  • Page 36 Hier schließen Sie den (Mono-)Ausgang eines externen Effektgeräts an. 12. Effects Loop Send Hier schließen Sie den (Mono-)Eingang eines externen Effektgeräts an. S1-104EL34 Technische Spezifikationen Leistung (RMS): 100 Watt Röhren: 4 x EL34, 3 x ECC83, 1 x ECC82 Gewicht (kg): 27.2 Abmessungen (mm): 705 x 285 x 278.5...
  • Page 37 La modification non autorisée de cet appareil est expressément interdite par Blackstar Amplification plc. N’introduisez jamais d’objets dans les fentes de ventilation du boîtier de l’appareil. N’exposez pas cet appareil à la pluie, à des liquides ni à aucune forme d’humidité.
  • Page 38 À des niveaux élevés, le volume des enceintes peut causer des pertes auditives définitives. Par conséquent, évitez de rester à proximité des enceintes lorsque le volume est élevé. Portez des protecteurs d’oreilles en cas d’exposition continue à des niveaux sonores élevés. Si le produit ne fonctionne pas normalement alors que vous respectez la notice d’emploi, confiez-le à...
  • Page 39 Tous les produits Blackstar sont soumis à de vastes essais en laboratoire et sur le terrain pour s’assurer de leur qualité en termes de fiabilité, de qualité et surtout de SONORITÉ...
  • Page 40: Clean

    Même dans les réglages les plus extrêmes, la distorsion sonne naturelle. Le contrôle ISF breveté par Blackstar Amplification représente véritablement un pas en avant en terme de flexibilité de son. Le réglage ISF définit le grain de son, d’un grain US à...
  • Page 41: Crunch

    Panneau de Contrôle 1. Entrée (Input) Branchez votre guitare ici. Utilisez toujours un son lead de bonne qualité. Clean Channel 2. Indicateur de mode Bright Clean Quand la diode verte est allumée, le mode Bright Clean est activé. 3. Sélecteur de mode Bright Clean Appuyez sur ce bouton pour sélectionner le mode Bright Clean.
  • Page 42: Overdrive 1

    8. Sélecteur de mode Crunch Appuyez sur ce switch pour sélectionner le mode Crunch 9. Crunch Gain Le réglage de Gain Crunch ajuste le niveau d’overdrive ou de distorsion assigné à ce canal. Le réglage Overdrive Gain permet d’ajuster le montant d’overdrive ou de distorsion assigné...
  • Page 43: Overdrive 2

    15. ISF (Infinite Shape Feature) Le réglage ISF fonctionne en conjonction avec les Bass, Middle et Treble. Il vous permet de choisir l’exacte signature tonale que vous souhaitez appliquer à votre son. Totalement à gauche, vous aurez des caractéristiques Américaines avec des basses serrées et des middle agressifs, alors que tout à...
  • Page 44 23. Volume Overdrive 2 Ce bouton permet de définir le volume du Canal Overdrive 2. Le tourner dans le sens des aiguilles d’une montre augmente le volume. Overdrive 1 and Overdrive 2 Channel EQ 12. Bass Ce réglage permet d’ajuster le niveau de basses fréquences dans votre son. Cet ampli dispose d’un circuit de modelage de tonalité...
  • Page 45: Clean

    29. Presence Le réglage Présence définit quant à lui la réponse globale en Aigues su S1-104. Les aigues percutantes sont accentuées sur les sons clairs et leur niveau d’agressivité augmenté sur les sons crunchs et overdrive. 30. Volume Ce réglage permet de définir le volume global de l’ampli. Le tourner dans le sens des aiguilles d’une montre permet d’augmenter le volume.
  • Page 46 Fonctionnement du DPR sur le canal Crunch Le réglage DPR vous permet de définir très précisément le niveau de distorsion lampe que vous voulez obtenir de la section préampli ainsi que de la section puissance. Canal Gain du Volume Master Description/Caractéristiques canal du canal...
  • Page 47: Overdrive 2

    Sélection de Canal en MIDI Les amplis Series One offrent la possibilité de sélectionner les canaux à l’aide de programmes MIDI et fonctionnent avec la majorité des contrôleurs MIDI. Les Series One peuvent être placés dans une installation midi vous permettant de sélectionner simultanément un canal de l’ampli et changer le patch d’un processeur d’effets MIDI connecté...
  • Page 48: Clean

    Changement de Programmes et Assignements Pour changer la configuration par défaut et ainsi le configurer pour le faire répondre comme vous le souhaitez à vos changements de programme : 1. L’ampli doit être allumé avec soit le stand by allumé, soit un jack connecté dans l’entrée ‘Input’, soit les 2.
  • Page 49: Crunch

    5. Pour sauvegarder la sélection appuyez sur le bouton OD2 (21). La diode témoin d’activation du cananl Overdrive 2 (20) clignotera rapidement 4 fois quand l’opération sera terminée. L’ampli reviendra donc à un fonctionnement normal, et répondra aux Changements de Programme uniquement sur le nouveau canal MIDI sélectionné.
  • Page 50: Overdrive 1

    Retour A la Configuration d’Usine Pour reconfigurer totalement l’ampli comme lors de sa sortie d’usine : 1. Avec l’ampli éteint, pressez et maintenez enfoncés les boutons Crunch (8) et OD2 (21). 2. Tout en maintenant les boutons enfoncés, allumez l’ordinateur. Après 2 secondes toutes les diodes de sélection de canal s’allument une fois afin de confirmer la restauration des réglages par défaut.
  • Page 51 7. Sélecteur d’Impedance Ce réglage permet de régler ul’impedance de l’ampli afin de l’adapter aux baffles connectés. Veuillez toujours vous assurer que l’impédance de l’ampli et du (ou des) baffle(s) correspondent. Baffle(s) branché(s) Impedance à Sélectionner 1 x 16 Ohm cabinet 16 Ohms 2 x 16 Ohm cabinets 8 Ohms...
  • Page 52 S1-104EL34 Spécification technique Puissance (RMS): 100 Watts Lampes: 4 x EL34, 3 x ECC83, 1 x ECC82 Poids (kg): 27.2 Dimensions (mm): 705 x 285 x 278.5 Pédalier: FS-3 fourni S1-1046L6 Spécification technique Leistung (RMS): 100 Watt Röhren: 4 x 6L6, 3 x ECC83, 1 x ECC82 Gewicht (kg): 27.2...
  • Page 53 O A LA INVERSA, DEJE UN RATO EL AMPLIFICADOR SIN ENCENDER PARA QUE ESTE ALCANCE LA TEMPERATURA MEDIA DEL NUEVO LUGAR. LAS MODIFICACIONES NO AUTORIZADAS ESTÁN EXPRESAMENTE PROHIBIDAS POR BLACKSTAR AMPLIFICATIO LTD. NUNCA APOYE OBJETOS EN NINGUNO DE LOS AGUJEROS DE VENTILACIîN LOCALIZADOS EN LAS TAPAS DEL EQUIPO.
  • Page 54 ANTES DE ENCENDER UN CABEZAL, LA PANTALLA DEBERA ESTAR CONECTADA COMO SE DESCRIBE EN EL LIBRO DE INSTRUCCIONES UTILIZANDO LOS CONDUCTORES RECOMENDADOS POR EL FABRICANTE. REEMPLAZE SIEMPRE LOS FUSIBLES DAÑADOS POR OTROS DE CARACTERISTICAS IDENTICAS. NUNCA DESCONECTE EL PROTECTOR DE LA TOMA DE TIERRA. LA POTENCIA DE SONIDO DE LOS ALTAVOCES CUANDO LOS NIVELES SON ALTOS PUEDEN CAUSAR UN DAÑO PERMANENTE.
  • Page 55 Investigación y Desarrollo de nuestro equipo de diseño. Con base en Northampton (UK), el equipo Blackstar son todos experimentados músicos y la única meta del proceso de desarrollo es proveer a los guitarritas con productos que sean las herramientas definitivas para su propia expresión.
  • Page 56: Clean

    Completando la equipación de ajuste de tono está otra exclusiva innovación patentada de Blackstar, el sistema DPR ( Reductor Dinámico de Potencia ). El DPR reduce la potencia de salida desde potencia completa (100W) hasta un 10% (10W) y cualquier potencia entre medio.
  • Page 57: Crunch

    Panel Frontal 1. Input Conecta tu guitarra aquí. Usa siempre un cable apantallado de calidad. Clean Channel 2. Indicador de canal Clean Cuando el LED verde luzca , el canal Limpio está seleccionado 3. Selector de canal Clean Oprime este interruptor para seleccionar el canal Limpio. 4.
  • Page 58 8. Selector de canal Crunch Pulsa este interruptor para seleccionar el canal Crunch. 9. Crunch Gain El control Overdrive Gain ajusta la cantidad de saturación o distorsión del canal Overdrive. Ajustes bajos, sentido contra horario, darán un sonido limpio a punto de romper.
  • Page 59 15. ISF (Infinite Shape Feature) El control ISF trabaja en conjunto con los controles Bass, Middle y Treble. Permite elegir la exacta firma tonal que prefieras. Girado completamente en sentido contra horario tiene un carácter más Americano con unos graves apretados y medios más agresivos, y girado completamente en sentido horario tiene un carácter británico que es más “leñoso”...
  • Page 60 23. Overdrive 2 Volume Controla el volumen del Canal Overdrive 2. Girándolo en sentido horario aumenta el volumen. Ecualización de canales Overdrive 1 y Overdrive 2 24. Bass El control Bass ajusta la cantidad de frecuencias graves en tu sonido. Este ampli tiene un avanzado circuito de control de tono que permite sonar apretado y cortante en sentido contra horario y cálido y pujante en sentido horario.
  • Page 61 29. Presence El control Presence ajusta la respuesta general de agudos del S1-104. Los agudos percusivos pueden ser acentuados en los sonidos limpios y la cantidad de agudos agresivos controlada en los tonos de Crucnh y Overdrive. 30. Volume Controla el volumen general de tu amplificador. Girándolo en sentido contra horario disminuye el volumen.
  • Page 62: Overdrive 1

    Uso del DPR en Crunch. El control DPR permite ajustar exactamente cuanto overdrive quieres que provenga de las valvulas de previo y cuanto de las en la etapa de potencia. Channel Channel Channel Master DPR Description/ Gain Volume Sound Character Crunch Bajo / Medio...
  • Page 63: Overdrive 2

    Conmutación de canales via MIDI Los Series One ofrecen la capacidad de controlar la selección de canales a través de mensajes MIDI de cambio de programa y la interacción con la mayoría de controladores MIDI es un proceso directo y sencillo. Los Series One se pueden colocar en una cadena MIDI permitiendo simultáneamente seleccionar un canal del amplificador y cambiar el programa ( match ) de un procesador de efectos MIDI conectado en el loop de efectos.
  • Page 64: Clean

    Asignación de cambio de programa Para cambiar la asignación por defecto y preparar el ampli para responder a diferentes Cambios de Programa: 1. El ampli debe estar conectado y con el interruptor Standby (33) encendido, un cable metido en la entrada (INPUT) o ambos a la vez. 2.
  • Page 65: Crunch

    5. Para almacenar la elección deseada pulse el selector OD 2 (21). Su LED parpadeará rápidamente cuatro veces cuando la operación se haya completado. La unidad volverá entonces a su funcionamiento normal y solamente responderá a cambios de programa en el canal MIDI recientemente seleccionado. Volcado MIDI a otro aparato Puede que quiera guardar los ajustes de selección de canal via MIDI para poder transferirlos a otro amplificador, por ejemplo.
  • Page 66: Panel Trasero

    Restaurar ajustes de fábrica. Para volver el amplificador a sus ajustes de fábrica: 1. Con el amplificador apagado, pulsar y mantener los selectores Crunch (8) y OD 2 (21). 2. Encender el amplificador mientras mantiene pulsados los selectores. Después de dos segundos todos los LED de selección de canal se iluminan a la vez para confirmar que los ajustes de fábrica han sido restaurados.
  • Page 67 7. Selector de Impedancia Este control casa la impedancia del amplificador con la de los altavoces ( pantalla ) conectados. Vea la tabla siguiente : Pantallas Conectadas Impedancia Selecionada 1 x 16 Ohm cabinet 16 Ohms 2 x 16 Ohm cabinets 8 Ohms 1 x 8 Ohm cabinet 8 Ohms...
  • Page 68 S1-104EL34 Especificaciones Técnicas Potencia (RMS): 100 Watios Valvulas: 4 x EL34, 3 x ECC83, 1 x ECC82 Peso (kg): 27.2 Dimensiones (mm): 705 x 285 x 278.5 Footswitch: FS-3 suministrado S1-1046L6 Especificaciones Técnicas Potencia (RMS): 100 Watios Valvulas: 4 x 6L6, 3 x ECC83, 1 x ECC82 Peso (kg): 27.2...
  • Page 78 Program Change Channel CLEAN CLEAN CLEAN CLEAN CRUNCH CRUNCH CRUNCH CRUNCH OVERDRIVE 1 OVERDRIVE 1 OVERDRIVE 1 OVERDRIVE 1 OVERDRIVE 2 OVERDRIVE 2 OVERDRIVE 2 OVERDRIVE 2 CLEAN CLEAN CLEAN CLEAN CRUNCH CRUNCH CRUNCH CRUNCH OVERDRIVE 1 OVERDRIVE 1 OVERDRIVE 1 OVERDRIVE 1 OVERDRIVE 2 OVERDRIVE 2...
  • Page 83 Manufacturer: Blackstar Amplification Date: 18-03-09 Model: Series One Version: 1.0 +------------------------------------------------------------------------+ Transmitted Recognized Remarks Function ... :---------------------+-----------------+----------------+---------------: :Basic Default : Omni :Channel Changed : 01-07 :---------------------+-----------------+----------------+---------------: :Mode Default Messages Altered :---------------------+-----------------+----------------+---------------: :Note :Number True Voice :---------------------+-----------------+----------------+---------------: :Velocity Note On Note Off...

This manual is also suitable for:

S1-1046l6

Table of Contents