3Dlabs Wildcat4 User Manual page 27

Graphics accelerator card
Table of Contents

Advertisement

4. When asked if you want to reboot, choose No. Follow the directions below for your
operating system:
·
Windows 2000 -- go to the Start menu and choose Shutdown, then choose
Shutdown from the displayed menu.
·
Windows XP -- go to the Start menu and select Turn off computer.
5. If you have not already done so, connect the second monitor, then turn on power to the
workstation. The primary monitor will display the startup sequence. If either monitor's
Power On LED does not illuminate, or if the primary monitor does not display the startup
sequence, consult Chapter 4 "Troubleshooting."
6. Start Windows and log on using an account with administrative privileges.
7. Right click on the Windows desktop (or left click if you've altered the default mouse
setup) and choose Properties from the menu.
8. On the Display Properties dialog box, click the Settings tab. The monitors display as icons
labeled 1 (for primary) and 2 (for secondary).
9. Highlight monitor 2 and click "Extend my Windows desktop onto this monitor."
10. Drag the monitor icons to match the physical arrangement of your monitors.
Software Configuration
3Dlabs Graphics Accelerator Card User's Guide
23

Advertisement

Table of Contents
loading

Table of Contents