Fault Tolerance Management - Bosch DVA-12T Installation Manual

46 en | Specifications
Event Broadcast/Alert
Event Notification
Hardware Connection
Configuration on Disk
Failure Indicator
7.7

Fault Tolerance Management

Battery Back-up Option
Automatic Drive Failure Detection
Automatic Rebuild on Spare Drives
Regenerate Logical Drive Parity
Bad Block Reassignment
Automatic Rebuild upon Failed Drive Replace-
ment
Manual Clone of Suspected Failed Drive
Concurrent Rebuild on Multiple Drives in a
RAID (0 + 1) Logical Drive
Salvage the 2
RAID 1, 3 or 5 Logical Drive
Salvage the 1
RAID 0 Logical Drive
F.01U.027.798 | V1 | 2006.06
Yes (via RAIDWatch sub-modules, the Configuration Client utility or
NPC)
Yes (via RAIDWatch sub-modules, Configuration Client or NPC)
In-band over Ethernet, or RS-232C
Configuration data stored on disks for logical drive assemblies to
exist after controller replacement; basic settings, e.g., channel
mode settings, are stored on NVRAM
Via alarm, LCD panel, RAIDWatch Manager session, or terminal
emulation
nd
Temporarily Failed Drive in a
st
Temporarily Failed Drive in a
RAID Subsystem DVA-12T | Installation Manual
Specification
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Bosch Security Systems