Advertisement
Quick Links
Advertisement
Related Manuals for KAM KXR
Summary of Contents for KAM KXR
- Page 1 KAM KXR POWER AMPS professional power amplifiers INSTRUCTION MANUAL www.kam.co.uk...
-
Page 2: Connecting Speakers
KXR Amplifier range is living proof of our commitment to meeting that goal. We know you’re itching to get it fired up but bear with us and we’ll run through a few things you should know that will help you get the best... -
Page 3: Connection Types
8 Ohm but the volume achieved from your speakers will be different for 4 and 8 Ohm speakers. The chart below tells you the power output ratings for KXR amplifiers at both 4 and 8 Ohms. -
Page 4: Bridge Mode Operation
The answer is to connect a single speaker across both channels of the amplifier. • This means that with KXR amplifiers you cannot use the Speakon outputs in bridge mode. • With KXR amplifiers you need to use the Binding Posts to connect a single speaker. - Page 5 Which equipment is right for your amplifier? All audio input connections on all KXR Amplifiers operate strictly at Line Level. This means that, providing you have an appropriate cable, you can connect any Line Level audio device to the input connections on the back of your amp’.
- Page 6 2. If you use a mixer, use it to set up optimum input and output signal levels – the level meter should be peaking at around zero dB 3. Slowly turn up the volume controls on your KXR amplifier – if you have used the right cables and made all of your connections correctly you should clearly hear music.
- Page 7 KXR150 power amplifier Amplifier power output 75W RMS per channel @ 4 Ohms 50W RMS per channel @ 8 Ohms Input connections Balanced XLR, unbalanced jack & RCA phono Output connections Speakon & binding post Minimum impedance 4 Ohms Frequency response 20Hz - 30KHz (±1.5dB) S/N Ratio 85dB...
- Page 8 670W RMS per channel @ 8 Ohms Input connections Balanced XLR & unbalanced jack Output connections Speakon & binding post Minimum impedance 4 Ohms Frequency response 20Hz - 30KHz (±1.5dB) S/N Ratio 90dB 0.1% Dimensions 416 x 88 x 481mm Weight 18.5Kg KXR POWER AMPLIFIERS www.kam.co.uk...