Page 1
KAM KXPRO AMPLIFIER professional power amplifier INSTRUCTION MANUAL www.kam.co.uk www.kam.co.uk...
Page 2
A set of speakers has two stated ratings. [5] Stereo LED - this green LED illuminates when the KXPro is operating in standard stereo mode (IE the Bridge Mode switch [11] is set to STEreo.
Page 3
REAR PANEL CONTROLS [14] Crossover Mode switches - the KXPro built in Crossovers are designed to be as versatile as possible and this Mode switch enables the selection of the correct configuration. [7] Balanced XLR audio inputs - use these balanced XLR line level audio inputs to connect any line Once the correct Mode has been chosen the Cutoff Frequencies are adjusted via the Crossover level audio device such as a DJ Mixer, Mixing Console, CD player etc.
Page 4
(even at lower volumes) than it is used to delivering to a lower impedance speaker… and that can over strain your amplifier. The KXPro has been designed to be Amplifier power output 800W RMS per channel @ 4 Ohms happy in Bridge Mode providing you do not attempt to use a 4 Ohm speaker.