Advertisement
JP1
JP1 - Switches the external Line in connector to act as a headphone socket by enabling the on-
board amplifier for headphones.
JP2 - Switches the internal digital input between S/PDIF in (for connection to digital devices) and
TTL (for connection to CD/DVD-ROM drives)
JP3 - Switches digital input between internal 2-pin Digital CD in and external S/PDIF Digital in.
9. Align SonicXplosion with the PCI slot you have chosen. You will need to use some pressure to push
the card into position, but do not use excessive force.
10. Secure the card using the screw that you removed previously.
11. Align the Game/MIDI port with the other empty slot space and secure it using the screw you
removed previously.
12. Replace the computer's cover, and switch on your computer. If you want to connect
SonicXplosion's external connectors, do so now.
You are now ready to install the drivers. Insert the Drivers and Applications CD and cancel plug and play
if it starts. Refer to the documentation on the CD for further details.
JP2
• CD in 1, 2 and Aux in accept sound
from your CD drive, DVD drive, or other
line level device.
• Digital CD in connects to the digital
output on the latest CD or DVD drives.
• Game/MIDI port connector connects to
the separate Game/MIDI port.
• Wavetable header enables you to
connect a MIDI wavetable upgrade.
8. You can also set the card jumpers at this
point. Jumpers are small plastic coated
connectors which can be used connect a
pair of pins together. The jumpers simply
pull off and push back on and you should
configure them as shown below.
JP3
Advertisement
