Download Print this page

VideoLogic SonicXplosion Installation Instructions page 2

Advertisement

Installing SonicXplosion
These instructions explain how to insert the card into your machine. You should install the drivers after
installing the card.
Handling the card
To minimise the risk of damage by electrostatic charges follow these simple guidelines:
Keep the card in its protective packaging until you are ready to install it
Before handling the card, touch the metal frame of your computer with the back of your hand to
discharge any static electricity or use an antistatic wristband
Hold the card by the backplate or by its edges; do not touch the printed circuit board
Do not place the card on top of your computer or on any other metal surface
Handle the card with care to avoid damage to the fragile electronic components on the board
Before installing the card
If you have on-board audio, you must disable it before installing SonicXplosion. This is usually done
through the BIOS control, which you can access while your computer is booting up. Refer to your
computer's documentation for information on adjusting your BIOS settings.
If you have another sound card in your computer, you should also remove it and its drivers before
installing SonicXplosion. To do this, refer to the card's documentation.
Write the serial number of your SonicXplosion card in the space on your warranty card.
Installing the hardware
Warning: Always switch off your computer before removing the cover and observe the warnings
specified in the manufacturer's documentation.
1. Switch off your computer, monitor, and any hardware devices connected to your computer.
2. Switch off the plug at the wall socket, but leave the power cable connected.
3. Remove the computer's cover.
4. Locate an empty PCI bus expansion slot and remove the slot cover.
5. Remove another slot cover to enable you to mount the Game/MIDI port.
6. Touch the bare metal chassis of your computer with the back of your hand to discharge any static
that may have built up on you or your clothes or use an antistatic wristband.
7. If you want to connect the card's internal sockets, do so now:

Advertisement

loading