Related Manuals for GE r10279v
Summary of Contents for GE r10279v
- Page 2 – – –...
- Page 3 Locate Outlet 10-1/2" 24" 9" Max. 34-1/2"-35" 24-1/8" Framed Models 1-1/2" 23-3/4" Stainless Steel Models 23-3/4" Stainless Steel Models 23-3/4" Min. ″ 23-3/4" ″ ″ ″ • • 34-1/4" to 34-3/4" *95° Door Swing on Custom Frame Models ″ ″ °...
- Page 5 Install 3 Hinge Screws Remove Top Hinge Hinge Pin and Bracket Door Stop and Cam Riser Remove Hinge Move Fill Plug to Right Side Install Covers...
- Page 6 Turn Right to Lower Turn Left to Raise • • ″ ″ 2-1/4” wide, all sides Rout the back side of the opening 7/16”deep, 1-1/8” wide 3/4” Thick Custom Panel, NOTE: Right-hand models illustrated. Cut notches for hinge clearance on the opposite side for left-hand door swing.
- Page 7 – – – ″ ″ ″ ″ ″ ″ 7/8” 24-7/32” ″ Washer ″ 30” Custom Framed Panel Tubular Handle Handle Standoff Handle Attachment Post Screw Screw...
-
Page 8: Template For Nameplate Location
1.800.444.1845. Note: Cut on Dotted Line Top of Glass Door Top of Badge DOOR NAMEPLATE LOCATION ® local service in your area, call Upper Right Corner of Glass if Hinge is on Right Door Frame Side GE Consumer & Industrial...