Inserting/Removing The Snap-In Adapter - BMW 328i xDrive Owner's Manual

Inserting/removing the
snap-in adapter*
1. Press button 1 and remove the cover.
2. Insert the snap-in adapter in the front and
press it downward until it engages.
To remove the snap-in adapter:
Press button 1.
Online Edition for Part no. 01 41 2 604 638 - © 02/10 BMW AG
Inserting mobile phone
1. If applicable, remove the protective cap
from the mobile phone's antenna connector
so that the mobile phone can engage in the
snap-in adapter.
2. With its buttons facing upward, slide the
mobile phone up towards the electrical con-
tact points and press it downward until it
engages.
The mobile phone's battery is charged as soon
as the vehicle is in radio readiness or the steer-
ing is unlocked.
To conserve vehicle battery power, you
should avoid using the mobile phone
when the ignition is switched
Removing mobile phone
Press the button.
off.<
195