AAD Silver-1 Owner's Manual

Silver reference loudspeakers

Advertisement

CAUTION
Read the following before using these speakers:
To assure the finest performance, please read this manual carefully. Keep it in a safe
place for future reference.
Install the speakers in a cool, dry, clean place away from windows, heat sources,
sources of excessive vibration, dust, moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electric shock, do not expose the speakers
to dripping or splashing.
To prevent the enclosure from warping or discoloring, do not place the speakers
where they will be exposed to direct sunlight or excessive humidity.
Do not place the following objects on top of the speakers:
1. Glass, china, etc.
If glass etc. Falls by vibrations and breaks, it may cause personal injury.
2. A burning candle etc.
If the candle falls by vibrations, it may cause fire and personal injury.
3. A vessel with water in it
If the vessel falls by vibrations and water spills, it may cause damage to the unit,
and/or you may get an electric shock.
Do not place the speakers where foreign objects such as water drips might fall. It
might cause a fire, damage to this unit, and/or personal injury.
Do not place the speakers where they are liable to be knocked over or struck by
falling objects. Stable placement will also ensure better sound performance.
Secure placement or installation is the owner's responsibility.
liable for any accident caused by improper placement or installation of speakers.
Any time you note distortion, reduce the volume of your amplifier immediately.
Make sure the input power does not exceed the specified maximum input power,
otherwise the speakers will be damaged.
SILVER REFERENCE
LOUDSPEAKERS
Owner s Manual
'
shall not be

Advertisement

Table of Contents
loading

Summary of Contents for AAD Silver-1

  • Page 1 Owner s Manual SILVER REFERENCE LOUDSPEAKERS CAUTION Read the following before using these speakers: To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install the speakers in a cool, dry, clean place away from windows, heat sources, sources of excessive vibration, dust, moisture and cold.
  • Page 2: Precautions When Positioning The Speakers

    Do not attempt to clean the speakers with chemical solvents as this might damage the finish. Use a clean, dry cloth. Do not attempt to modify or fix the speakers. Contact qualified service personnel when any service is needed. The cabinet should never be opened for any reasons.
  • Page 3 SILVER REFERENCE PRODUCTS Refer to Page 9~10 for specifications Silver-1 Silver-3C Silver-7 Silver-5 SR-1 SR-2 S-160...
  • Page 4 BASE ASSEMBLING INSTRUCTIONS(Only for Silver-5 & Silver-7) Step 1: Stand speaker upside down, with protective foams on both ends. Now remove the foam piece, exposing bottom of speaker. Step 2: Place rotation disc on bottom of speaker, align the two center hole on disc and on speaker. Step 3: Place metal base on top of rotation disc with wide side in the front;...
  • Page 5: Placing The Speakers

    PLACING THE SPEAKERS Two Channel Stereo Application For stereo listening, you may choose any one pair of bookshelf or floor standing model. The size of speakers should be determined by the size of your living space so that they can provide sufficient volume. The two loudspeakers should be placed an equal distance from your listening position.
  • Page 6 CONNECTIONS Note: Make sure your amplifier is off and disconnected from power while you are connecting speakers to amplifier. Turn your amplifier on only after you check and make sure speakers are properly connected. Two Channel Stereo Application Connections are made at the terminals located on the back of the loudspeaker system.
  • Page 7 Received SPEAKER OUTPUT Home Theater Main Speakers Silver-7 Silver-7 Center Speaker .or. .or. Silver-5 Silver-5 Silver-3C .or. .or. Rear Speakers Silver-1 Silver-1 SR-2 SR-2 .or. .or. SR-1 SR-1 Main Speaker Center Speaker Rear Speaker Front Speaker Subwoofer Subwoofer S-160 SR-2 SR-2 .or.
  • Page 8: Removing The Grille

    REMOVING THE GRILLE The grille is attached to protect the speaker unit, but you can remove it if necessary. Hold the speaker with one hand, and pull the grille gently with the other to remove it. Notes: When removing the grille, be careful that you don’t touch the drive units, and don’t exert excessive force with any tools.
  • Page 9: Specification

    SPECIFICATION Silver Reference Specifications Model: Silver-1 Model: Silver-3C Sensitivity (1 Watt @ 1M): 87 dB Sensitivity (1 Watt @ 1M): 88 dB Impedance: 6 Ohms Impedance: 4 Ohms (compatible with 8 ohm amplifier load) Frequency Response : 40Hz-40KHz +/-2dB Frequency Response: 40Hz-40KHz +/-2dB...
  • Page 10 Model: Silver-160 Amplifier Type: Solid state class A/B Power: 200 watts continous into 4 OHMS Woofer: 10" AAD designed high excursion Frequency Response: 23 Hz to 160HZ +/3dB Electronic Crossover: Continuous variable from 30Hz to 160Hz Phase Control: 0 -180 variable...

This manual is also suitable for:

Silver-3cSr-2Silver-160Silver-5Silver-7Sr-1

Table of Contents